From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Mon, 9 Aug 2010 16:18:26 +0200 Subject: [Buildroot] setting a driver in directfb through buildroot In-Reply-To: References: Message-ID: <20100809161826.319e58f3@surf> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hello Anthony, On Mon, 9 Aug 2010 13:05:25 +0100 anthony henderson wrote: > I hope someone can help me out on this. > I've compiled my rootfs in build root with directfb set. I'm using a cirrus > logic FB93xx, which as far as I can see it has a driver. I can't see any > way of setting the driver in make menuconfig. I can however see in the > directory buildroot/package/directfb a file called config.in. Can I set > here? If so can anyone tell me what to put in for the EP93XX driver, I > can't find anything documented? I have tried setting from my ARM system > using the directfb-config with > directfb-config --graphics=ep93xx. This doesn't work. I just says driver > none. > > I think I need the correct driver as directfb examples are crashing with > directfbcreate(&dfb) initialization error! I've cooked the attached patch to allow a Buildroot option to enable the DirectFB ep9x driver. Could you apply the patch to Buildroot, enable the BR2_PACKAGE_DIRECTFB_EP9X option, and rebuild ? Note: I haven't tested the patch, so it may not work. Regards, Thomas -- Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: 0001-Add-support-for-DirectFB-EP9x-driver.patch Type: text/x-patch Size: 1320 bytes Desc: not available URL: