From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Tue, 14 Dec 2010 14:25:44 +0100 Subject: [Buildroot] cannot log to my build root In-Reply-To: References: Message-ID: <20101214142544.7863d2d2@surf> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On Tue, 14 Dec 2010 15:06:43 +0200 Diego Iastrubni wrote: > I am using buitdroot to create my development environment (the > production is something bigger and slower made manually once...). I > am using codesourcery for arm as the toolchain. the HW (which is not > relevant to the scenario) is an OMAP3 device boots with my old > firmware). > > I forked (I use git and not released versions) buildroot a few > months and its worked after I manually mknod'ed some devices. Now I > pulled from you guys, and now I cannot even login to my new clean > environment (last time it was /dev/tty ,which was not correct). Does > anyone have an idea? What is your boot log ? Quite likely, you should read http://buildroot.org/downloads/buildroot.html#faq-boot-hangs, but there may be other problems as well, of course. Thomas -- Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com