[Buildroot] Buildroot with 2.4.27 kernel: Network problems

[Simon Kagstrom <simon.kagstrom@gmail.com>]

On Sun, 30 Jan 2011 13:43:35 +0100
Peter Korsgaard <jacmet@uclibc.org> wrote:

>  Simon> I've tried both. I've compiled a static busybox to be able to
>  Simon> chroot into the buildroot rootfs, but both behave the same
>  Simon> way.
> 
> So you get this with a statically built busybox as well? Odd. Ping
> needs to be setuid root to work. Are you root?

Yes, also with the static busybox. I'm root (which by the way is the
only user on the system).

>  Simon> I know 2.4 is ancient. However, I don't have the sources to
>  Simon> even attempt a port to 2.6 (a request to Philips have been
>  Simon> sent though), and also would like to avoid bricking my
>  Simon> system, so I'd like to stay with the current kernel.
> 
> Ok. I would expect a buildroot generated rootfs to work with the 2.4
> kernel without too much trouble.

Well, in a way it does work pretty well. Apart from networking, pretty
much everything I've tried works well. However, I really need
networking since I plan to play with mpd and despotify.

> What kind of hardware is this (CPU type)? How have you configured
> buildroot?

It's an NXP ARM, cpuinfo is as follows:

g2 trunk 6869 Island:# cat /proc/cpuinfo 
Processor	: ARM926EJ-Sid(wb) rev 5 (v5EJl)
BogoMIPS	: 54.00
Features	: swp half thumb fastmult 
Hardware	: Philips HasLi-7 PNX0106 A-Hub Server board
Revision	: 0000
Serial		: 0000000000000000

I've attached the buildroot config below. I use 2010.11 by the way
(patched to include libao), but plan to switch to the current git head
to get the mpd package. I'll need to solve this issue first though.

// Simon

#
# Automatically generated make config: don't edit
# Buildroot version: 2010.11-g7d2682b
# Sat Jan 29 15:04:04 2011
#
BR2_HAVE_DOT_CONFIG=y
BR2_arm=y
# BR2_armeb is not set
# BR2_avr32 is not set
# BR2_i386 is not set
# BR2_mips is not set
# BR2_mipsel is not set
# BR2_powerpc is not set
# BR2_sh is not set
# BR2_sh64 is not set
# BR2_sparc is not set
# BR2_x86_64 is not set
# BR2_xtensa is not set
# BR2_generic_arm is not set
# BR2_arm7tdmi is not set
# BR2_arm610 is not set
# BR2_arm710 is not set
# BR2_arm720t is not set
# BR2_arm920t is not set
# BR2_arm922t is not set
BR2_arm926t=y
# BR2_arm10t is not set
# BR2_arm1136jf_s is not set
# BR2_arm1176jz_s is not set
# BR2_arm1176jzf_s is not set

#
# cortex-A8/A9 needs gcc >= 4.4.x
#
# BR2_cortex_a8 is not set
# BR2_cortex_a9 is not set
# BR2_sa110 is not set
# BR2_sa1100 is not set
# BR2_xscale is not set
# BR2_iwmmxt is not set
BR2_ARM_TYPE="ARM926T"
# BR2_ARM_EABI is not set
BR2_ARM_OABI=y
BR2_ARCH="arm"
BR2_ENDIAN="LITTLE"
BR2_GCC_TARGET_TUNE="arm926ej-s"
BR2_GCC_TARGET_ARCH="armv5te"
BR2_GCC_TARGET_ABI="apcs-gnu"

#
# Target options
#

#
# Preset Devices
#
# BR2_TARGET_ARMLTD is not set
# BR2_TARGET_ATMEL is not set
# BR2_TARGET_KWIKBYTE is not set
BR2_TARGET_GENERIC_HOSTNAME="buildroot"
BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot"
# BR2_TARGET_GENERIC_GETTY is not set

#
# Build options
#

#
# Commands
#
BR2_WGET="wget --passive-ftp -nd -t 3"
BR2_SVN="svn"
BR2_BZR="bzr"
BR2_GIT="git"
BR2_ZCAT="gzip -d -c"
BR2_BZCAT="bzcat"
BR2_TAR_OPTIONS=""
BR2_DL_DIR="$(TOPDIR)/dl"
BR2_STAGING_DIR="$(BASE_DIR)/staging"

#
# Mirrors and Download locations
#
BR2_PRIMARY_SITE=""
BR2_BACKUP_SITE="http://sources.buildroot.net/"
BR2_SOURCEFORGE_MIRROR="easynews"
BR2_KERNEL_MIRROR="http://www.kernel.org/pub/"
BR2_GNU_MIRROR="http://ftp.gnu.org/pub/gnu"
BR2_DEBIAN_MIRROR="http://ftp.debian.org"
BR2_JLEVEL=2
# BR2_DEPRECATED is not set
# BR2_ENABLE_DEBUG is not set
BR2_STRIP_strip=y
# BR2_STRIP_sstrip is not set
# BR2_STRIP_none is not set
# BR2_OPTIMIZE_0 is not set
# BR2_OPTIMIZE_1 is not set
# BR2_OPTIMIZE_2 is not set
# BR2_OPTIMIZE_3 is not set
BR2_OPTIMIZE_S=y
# BR2_PREFER_STATIC_LIB is not set
# BR2_HAVE_DOCUMENTATION is not set
# BR2_HAVE_DEVFILES is not set

#
# Toolchain
#
BR2_TOOLCHAIN_BUILDROOT=y
# BR2_TOOLCHAIN_EXTERNAL is not set
# BR2_TOOLCHAIN_CTNG is not set

#
# Kernel Header Options
#
# BR2_KERNEL_HEADERS_2_6_34 is not set
# BR2_KERNEL_HEADERS_2_6_35 is not set
BR2_KERNEL_HEADERS_2_6_36=y
# BR2_KERNEL_HEADERS_VERSION is not set
# BR2_KERNEL_HEADERS_SNAP is not set
BR2_DEFAULT_KERNEL_HEADERS="2.6.36.1"

#
# uClibc Options
#
# BR2_UCLIBC_VERSION_0_9_30 is not set
BR2_UCLIBC_VERSION_0_9_31=y
# BR2_UCLIBC_VERSION_SNAPSHOT is not set
BR2_UCLIBC_VERSION_STRING="0.9.31"
BR2_UCLIBC_CONFIG="toolchain/uClibc/uClibc-0.9.31.config"
# BR2_PTHREAD_DEBUG is not set
# BR2_UCLIBC_INSTALL_TEST_SUITE is not set

#
# Binutils Options
#
# BR2_BINUTILS_VERSION_2_20 is not set
BR2_BINUTILS_VERSION_2_20_1=y
BR2_BINUTILS_VERSION="2.20.1"
BR2_EXTRA_BINUTILS_CONFIG_OPTIONS=""

#
# GCC Options
#
# BR2_GCC_VERSION_4_2_4 is not set
BR2_GCC_VERSION_4_3_X=y
# BR2_GCC_VERSION_4_4_X is not set
# BR2_GCC_VERSION_4_5_X is not set
# BR2_GCC_VERSION_SNAP is not set
BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE=y
BR2_GCC_VERSION="4.3.5"
BR2_EXTRA_GCC_CONFIG_OPTIONS=""
# BR2_GCC_CROSS_OBJC is not set
# BR2_GCC_CROSS_FORTRAN is not set
# BR2_INSTALL_OBJC is not set
# BR2_INSTALL_FORTRAN is not set
BR2_GCC_SHARED_LIBGCC=y

#
# Ccache Options
#
# BR2_CCACHE is not set

#
# Gdb Options
#
# BR2_PACKAGE_GDB is not set
# BR2_PACKAGE_GDB_SERVER is not set
# BR2_PACKAGE_GDB_HOST is not set

#
# Common Toolchain Options
#
# BR2_LARGEFILE is not set
# BR2_INET_IPV6 is not set
# BR2_INET_RPC is not set
# BR2_ENABLE_LOCALE is not set
# BR2_ENABLE_LOCALE_PURGE is not set
BR2_NEEDS_GETTEXT=y
BR2_USE_WCHAR=y
BR2_PREFER_SOFT_FLOAT=y
BR2_SOFT_FLOAT=y
# BR2_USE_SSP is not set
# BR2_PTHREADS_NONE is not set
# BR2_PTHREADS is not set
BR2_PTHREADS_OLD=y
# BR2_PROGRAM_INVOCATION is not set
# BR2_INSTALL_LIBSTDCPP is not set
BR2_TARGET_OPTIMIZATION="-pipe"
# BR2_ELF2FLT is not set
# BR2_MKLIBS is not set
# BR2_PACKAGE_SSTRIP_TARGET is not set
# BR2_PACKAGE_SSTRIP_HOST is not set
BR2_CROSS_TOOLCHAIN_TARGET_UTILS=y

#
# Package Selection for the target
#
BR2_PACKAGE_BUSYBOX=y
# BR2_BUSYBOX_VERSION_1_15_X is not set
# BR2_BUSYBOX_VERSION_1_16_X is not set
BR2_BUSYBOX_VERSION_1_17_X=y
# BR2_PACKAGE_BUSYBOX_SNAPSHOT is not set
BR2_BUSYBOX_VERSION="1.17.4"
BR2_PACKAGE_BUSYBOX_FULLINSTALL=y
BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.17.x.config"
# BR2_PACKAGE_BUSYBOX_SHOW_OTHERS is not set
# BR2_PACKAGE_CUSTOMIZE is not set

#
# Audio and video libraries and applications
#
# BR2_PACKAGE_ALSA_LIB is not set

#
# alsa-utils requires a toolchain with LARGEFILE support
#
BR2_PACKAGE_AUMIX=y
BR2_PACKAGE_FLAC=y

#
# ffmpeg requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_GSTREAMER is not set

#
# gst-ffmpeg requires a toolchain with LARGEFILE support
#
BR2_PACKAGE_LIBAO=y
BR2_PACKAGE_LIBCDAUDIO=y

#
# libdvdread requires a toolchain with LARGEFILE support
#

#
# libdvdnav requires a toolchain with LARGEFILE support
#
BR2_PACKAGE_LIBID3TAG=y
BR2_PACKAGE_LIBMAD=y
# BR2_PACKAGE_LIBMMS is not set
# BR2_PACKAGE_LIBMPD is not set
BR2_PACKAGE_LIBMPEG2=y
# BR2_PACKAGE_LIBMPEG2_BINS is not set
BR2_PACKAGE_LIBOGG=y
BR2_PACKAGE_LIBSNDFILE=y
# BR2_PACKAGE_LIBTHEORA is not set
# BR2_PACKAGE_LIBVORBIS is not set
BR2_PACKAGE_MADPLAY=y
# BR2_PACKAGE_MPG123 is not set
BR2_PACKAGE_MPLAYER=y
# BR2_PACKAGE_SPEEX is not set

#
# swfdec requires a toolchain with WCHAR and C++ support
#

#
# festival requires a toolchain with C++ support enabled
#

#
# taglib requires a toolchain with C++ support enabled
#
BR2_PACKAGE_TREMOR=y

#
# Compressors and decompressors
#
# BR2_PACKAGE_LZOP is not set
# BR2_PACKAGE_XZ is not set

#
# Debugging, profiling and benchmark
#
# BR2_PACKAGE_DMALLOC is not set
# BR2_PACKAGE_KEXEC is not set

#
# lmbench requires a toolchain with RPC support
#

#
# lsof requires a toolchain with RPC support
#
# BR2_PACKAGE_LTRACE is not set
# BR2_PACKAGE_MEMSTAT is not set
# BR2_PACKAGE_NETPERF is not set

#
# oprofile requires a toolchain with C++ support enabled
#
BR2_PACKAGE_STRACE=y

#
# Development tools
#
# BR2_PACKAGE_AUTOCONF is not set
# BR2_PACKAGE_AUTOMAKE is not set
# BR2_PACKAGE_BISON is not set
# BR2_PACKAGE_BSDIFF is not set
# BR2_PACKAGE_CVS is not set
# BR2_PACKAGE_DISTCC is not set
# BR2_PACKAGE_FAKEROOT is not set
# BR2_PACKAGE_FLEX is not set

#
# native toolchain needs development files in target filesystem
#
BR2_PACKAGE_GETTEXT=y
# BR2_PACKAGE_GETTEXT_STATIC is not set
BR2_PACKAGE_LIBINTL=y
# BR2_PACKAGE_LIBGMP is not set

#
# gperf requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_MAKE is not set
# BR2_PACKAGE_LIBMPC is not set
# BR2_PACKAGE_LIBMPFR is not set
# BR2_PACKAGE_LIBTOOL is not set
# BR2_PACKAGE_M4 is not set
# BR2_PACKAGE_PKG_CONFIG is not set

#
# Games
#
# BR2_PACKAGE_GNUCHESS is not set
# BR2_PACKAGE_PRBOOM is not set

#
# Graphic libraries and applications (graphic/text)
#

#
# Graphic applications
#
# BR2_PACKAGE_RRDTOOL is not set

#
# graphic libraries
#
# BR2_PACKAGE_DIRECTFB is not set
# BR2_PACKAGE_FBDUMP is not set
# BR2_PACKAGE_FBV is not set
# BR2_PACKAGE_IMAGEMAGICK is not set
BR2_PACKAGE_SDL=y
# BR2_PACKAGE_SDL_FBCON is not set
BR2_PACKAGE_SDL_IMAGE=y

#
# SDL_image file format support
#
BR2_PACKAGE_SDL_IMAGE_BMP=y
# BR2_PACKAGE_SDL_IMAGE_GIF is not set
BR2_PACKAGE_SDL_IMAGE_JPEG=y
# BR2_PACKAGE_SDL_IMAGE_LBM is not set
# BR2_PACKAGE_SDL_IMAGE_PCX is not set
BR2_PACKAGE_SDL_IMAGE_PNG=y
# BR2_PACKAGE_SDL_IMAGE_PNM is not set
# BR2_PACKAGE_SDL_IMAGE_TARGA is not set
# BR2_PACKAGE_SDL_IMAGE_TIFF is not set
# BR2_PACKAGE_SDL_IMAGE_XCF is not set
# BR2_PACKAGE_SDL_IMAGE_XPM is not set
# BR2_PACKAGE_SDL_IMAGE_XV is not set
BR2_PACKAGE_SDL_MIXER=y
BR2_PACKAGE_SDL_SOUND=y
BR2_PACKAGE_SDL_SOUND_PLAYSOUND=y
BR2_PACKAGE_SDL_NET=y
BR2_PACKAGE_SDL_TTF=y
# BR2_PACKAGE_SDL_GFX is not set

#
# other GUIs
#

#
# qt requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_XORG7 is not set

#
# X libraries and helper libraries
#
# BR2_PACKAGE_LIBERATION is not set

#
# X Window managers
#

#
# X applications
#
# BR2_PACKAGE_GOB2 is not set

#
# midori requires C++, WCHAR in toolchain and libgtk2
#

#
# Hardware handling
#

#
# cdrkit requires a toolchain with LARGEFILE support
#
BR2_PACKAGE_CRAMFS=y
# BR2_PACKAGE_DBUS is not set

#
# dmraid requires a toolchain with LARGEFILE support
#

#
# dosfstools requires a toolchain with LARGEFILE support
#

#
# e2fsprogs requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_EEPROG is not set
# BR2_PACKAGE_FCONFIG is not set
# BR2_PACKAGE_FIS is not set
# BR2_PACKAGE_GADGETFS_TEST is not set
# BR2_PACKAGE_GENEXT2FS is not set
# BR2_PACKAGE_GENROMFS is not set
# BR2_PACKAGE_GPSD is not set

#
# gvfs requires a toolchain with LARGEFILE and WCHAR support
#
# BR2_PACKAGE_HAL is not set
# BR2_PACKAGE_HWDATA is not set
# BR2_PACKAGE_I2C_TOOLS is not set
# BR2_PACKAGE_INPUT_TOOLS is not set
# BR2_PACKAGE_IOSTAT is not set
# BR2_PACKAGE_KBD is not set
BR2_PACKAGE_LM_SENSORS=y

#
# lm-sensors tools
#
# BR2_PACKAGE_LM_SENSORS_SENSORS is not set
BR2_PACKAGE_LM_SENSORS_FANCONTROL=y
# BR2_PACKAGE_LM_SENSORS_ISADUMP is not set
# BR2_PACKAGE_LM_SENSORS_ISASET is not set
# BR2_PACKAGE_LM_SENSORS_PWMCONFIG is not set
# BR2_PACKAGE_LM_SENSORS_SENSORS_DETECT is not set

#
# lvm2 requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_MAKEDEVS is not set
# BR2_PACKAGE_MDADM is not set
# BR2_PACKAGE_MEMTESTER is not set
BR2_PACKAGE_MTD=y

#
# MTD tools selection
#
# BR2_PACKAGE_MTD_DOCFDISK is not set
# BR2_PACKAGE_MTD_DOC_LOADBIOS is not set
BR2_PACKAGE_MTD_FLASHCP=y
BR2_PACKAGE_MTD_FLASH_ERASE=y
BR2_PACKAGE_MTD_FLASH_ERASEALL=y
BR2_PACKAGE_MTD_FLASH_INFO=y
BR2_PACKAGE_MTD_FLASH_LOCK=y
# BR2_PACKAGE_MTD_FLASH_OTP_DUMP is not set
# BR2_PACKAGE_MTD_FLASH_OTP_INFO is not set
BR2_PACKAGE_MTD_FLASH_UNLOCK=y
# BR2_PACKAGE_MTD_FTL_CHECK is not set
# BR2_PACKAGE_MTD_FTL_FORMAT is not set
# BR2_PACKAGE_MTD_JFFS2DUMP is not set
# BR2_PACKAGE_MTD_MKFSJFFS2 is not set
BR2_PACKAGE_MTD_MTD_DEBUG=y
BR2_PACKAGE_MTD_NANDDUMP=y
BR2_PACKAGE_MTD_NANDTEST=y
BR2_PACKAGE_MTD_NANDWRITE=y
# BR2_PACKAGE_MTD_NFTLDUMP is not set
# BR2_PACKAGE_MTD_NFTL_FORMAT is not set

#
# recv_image requires a toolchain with IPv6 support
#
# BR2_PACKAGE_MTD_RFDDUMP is not set
# BR2_PACKAGE_MTD_RFDFORMAT is not set
# BR2_PACKAGE_MTD_SERVE_IMAGE is not set
# BR2_PACKAGE_MTD_SUMTOOL is not set
BR2_PACKAGE_MTD_MTDINFO=y
# BR2_PACKAGE_MTD_UBIATTACH is not set
# BR2_PACKAGE_MTD_UBICRC32 is not set
# BR2_PACKAGE_MTD_UBIDETACH is not set
# BR2_PACKAGE_MTD_UBIFORMAT is not set
# BR2_PACKAGE_MTD_UBIMKVOL is not set
# BR2_PACKAGE_MTD_UBINFO is not set
# BR2_PACKAGE_MTD_UBINIZE is not set
# BR2_PACKAGE_MTD_UBIRENAME is not set
# BR2_PACKAGE_MTD_UBIRMVOL is not set
# BR2_PACKAGE_MTD_UBIRSVOL is not set
# BR2_PACKAGE_MTD_UBIUPDATEVOL is not set

#
# ntfs-3g requires a toolchain with LARGEFILE and WCHAR support
#

#
# ntfsprogs requires a toolchain with WCHAR and LARGEFILE support
#
# BR2_PACKAGE_PCIUTILS is not set
# BR2_PACKAGE_RNG_TOOLS is not set
# BR2_PACKAGE_SETSERIAL is not set
# BR2_PACKAGE_SMARTMONTOOLS is not set

#
# squashfs requires a toolchain with LARGEFILE support
#

#
# sshfs requires a toolchain with LARGEFILE and WCHAR support
#
# BR2_PACKAGE_SYSSTAT is not set
# BR2_PACKAGE_UDEV is not set
# BR2_PACKAGE_USB_MODESWITCH is not set
# BR2_PACKAGE_USBMOUNT is not set
BR2_PACKAGE_USBUTILS=y
# BR2_PACKAGE_USBUTILS_ZLIB is not set
# BR2_PACKAGE_WIPE is not set

#
# xfsprogs requires a toolchain with LARGEFILE support
#

#
# Interpreter languages and scripting
#
# BR2_PACKAGE_HASERL is not set
# BR2_PACKAGE_LUA is not set
# BR2_PACKAGE_MICROPERL is not set
# BR2_PACKAGE_PHP is not set
BR2_PACKAGE_PYTHON=y
# BR2_PACKAGE_PYTHON_DEV is not set
BR2_PACKAGE_PYTHON_PY_ONLY=y
# BR2_PACKAGE_PYTHON_PYC_ONLY is not set
# BR2_PACKAGE_PYTHON_PY_PYC is not set

#
# The following modules are unusual or require extra libraries
#
# BR2_PACKAGE_PYTHON_BSDDB is not set
# BR2_PACKAGE_PYTHON_CODECSCJK is not set
# BR2_PACKAGE_PYTHON_CURSES is not set
BR2_PACKAGE_PYTHON_PYEXPAT=y
BR2_PACKAGE_PYTHON_READLINE=y
BR2_PACKAGE_PYTHON_SSL=y
# BR2_PACKAGE_PYTHON_TKINTER is not set
BR2_PACKAGE_PYTHON_UNICODEDATA=y
# BR2_PACKAGE_RUBY is not set
# BR2_PACKAGE_TCL is not set

#
# Libraries
#

#
# Compression and decompression
#
# BR2_PACKAGE_LIBARCHIVE is not set
# BR2_PACKAGE_LZO is not set
BR2_PACKAGE_ZLIB=y

#
# Crypto
#
# BR2_PACKAGE_BEECRYPT is not set
# BR2_PACKAGE_LIBGCRYPT is not set
# BR2_PACKAGE_LIBGPG_ERROR is not set
BR2_PACKAGE_OPENSSL=y
# BR2_PACKAGE_OPENSSL_BIN is not set
# BR2_PACKAGE_OPENSSL_ENGINES is not set

#
# Database
#
# BR2_PACKAGE_BERKELEYDB is not set

#
# Mysql client requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_SQLITE is not set

#
# Filesystem
#
# BR2_PACKAGE_GAMIN is not set
# BR2_PACKAGE_LIBCONFIG is not set
# BR2_PACKAGE_LIBCONFUSE is not set

#
# libfuse requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_LIBLOCKFILE is not set
# BR2_PACKAGE_LIBSYSFS is not set

#
# Graphics
#
# BR2_PACKAGE_ATK is not set
# BR2_PACKAGE_CAIRO is not set
# BR2_PACKAGE_FONTCONFIG is not set
BR2_PACKAGE_FREETYPE=y
BR2_PACKAGE_JPEG=y
# BR2_PACKAGE_LIBART is not set
# BR2_PACKAGE_GDK_PIXBUF is not set

#
# libgtk2 requires a toolchain with WCHAR and C++ support
#
BR2_PACKAGE_LIBPNG=y
# BR2_PACKAGE_LIBSVGTINY is not set
# BR2_PACKAGE_LIBUNGIF is not set

#
# pango requires a toolchain with WCHAR and C++ support
#
# BR2_PACKAGE_PIXMAN is not set
# BR2_PACKAGE_TIFF is not set

#
# webkit requires C++, WCHAR in toolchain and libgtk2
#

#
# Hardware handling
#
# BR2_PACKAGE_LIBAIO is not set
# BR2_PACKAGE_LIBRAW1394 is not set
# BR2_PACKAGE_TSLIB is not set
BR2_PACKAGE_LIBUSB=y
BR2_PACKAGE_LIBUSB_COMPAT=y

#
# Networking
#
# BR2_PACKAGE_LIBCGI is not set

#
# libcgicc requires a toolchain with C++ support enabled
#
BR2_PACKAGE_LIBCURL=y
# BR2_PACKAGE_CURL is not set
# BR2_PACKAGE_LIBDNET is not set
# BR2_PACKAGE_LIBEXOSIP2 is not set
# BR2_PACKAGE_LIBIDN is not set
# BR2_PACKAGE_LIBMICROHTTPD is not set
# BR2_PACKAGE_NEON is not set
# BR2_PACKAGE_LIBNL is not set
# BR2_PACKAGE_LIBPCAP is not set
# BR2_PACKAGE_LIBOSIP2 is not set
# BR2_PACKAGE_LIBRSYNC is not set
# BR2_PACKAGE_LIBSOUP is not set

#
# libupnp requires a toolchain with LARGEFILE support
#

#
# Other
#
# BR2_PACKAGE_ARGP_STANDALONE is not set
# BR2_PACKAGE_LIBATOMIC_OPS is not set
# BR2_PACKAGE_LIBCAP is not set
# BR2_PACKAGE_LIBDAEMON is not set
# BR2_PACKAGE_LIBELF is not set
# BR2_PACKAGE_LIBEVENT is not set
BR2_PACKAGE_LIBGLIB2=y
# BR2_PACKAGE_LIBOIL is not set

#
# Text and terminal handling
#

#
# enchant requires a toolchain with C++ and WCHAR support enabled
#

#
# icu requires a toolchain with C++ support and WCHAR enabled
#
BR2_PACKAGE_LIBICONV=y
BR2_PACKAGE_NCURSES=y
# BR2_PACKAGE_NCURSES_TARGET_PANEL is not set
# BR2_PACKAGE_NCURSES_TARGET_FORM is not set
# BR2_PACKAGE_NCURSES_TARGET_MENU is not set
# BR2_PACKAGE_NEWT is not set
# BR2_PACKAGE_PCRE is not set
# BR2_PACKAGE_POPT is not set
BR2_PACKAGE_READLINE=y
# BR2_PACKAGE_SLANG is not set

#
# XML
#
BR2_PACKAGE_EXPAT=y
# BR2_PACKAGE_EZXML is not set
# BR2_PACKAGE_LIBXML2 is not set
# BR2_PACKAGE_LIBXSLT is not set

#
# xerces-c++ requires a toolchain with C++ support enabled
#

#
# Miscellaneous
#
# BR2_PACKAGE_SHARED_MIME_INFO is not set

#
# Networking applications
#
# BR2_PACKAGE_ARGUS is not set
# BR2_PACKAGE_AVAHI is not set
# BR2_PACKAGE_AXEL is not set

#
# bind requires a toolchain with LARGEFILE support
#

#
# bmon requires a toolchain with IPv6 support
#
# BR2_PACKAGE_BRIDGE is not set

#
# ctorrent requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_CUPS is not set
# BR2_PACKAGE_DNSMASQ is not set
# BR2_PACKAGE_DROPBEAR is not set
BR2_PACKAGE_ETHTOOL=y
# BR2_PACKAGE_HOSTAPD is not set
# BR2_PACKAGE_IFPLUGD is not set

#
# iperf requires a toolchain with C++ support enabled
#

#
# iproute2 requires a toolchain with IPv6 support
#
# BR2_PACKAGE_IPSEC_TOOLS is not set

#
# iptables requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_IW is not set

#
# Kismet requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_L2TP is not set
# BR2_PACKAGE_LINKS is not set
# BR2_PACKAGE_LRZSZ is not set
# BR2_PACKAGE_MIIDIAG is not set
# BR2_PACKAGE_MROUTED is not set
# BR2_PACKAGE_MUTT is not set
# BR2_PACKAGE_NBD is not set

#
# ncftp requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_NETPLUG is not set
# BR2_PACKAGE_NETSNMP is not set
# BR2_PACKAGE_NETSTAT_NAT is not set

#
# nfs-utils requires a toolchain with 'Enable RPC' selected
#
# BR2_PACKAGE_NTP is not set
# BR2_PACKAGE_NUTTCP is not set

#
# olsr requires a toolchain with IPv6 support
#
# BR2_PACKAGE_OPENNTPD is not set
# BR2_PACKAGE_OPENSSH is not set
# BR2_PACKAGE_OPENVPN is not set

#
# portmap requires a toolchain with 'Enable RPC' selected
#
# BR2_PACKAGE_PPPD is not set
# BR2_PACKAGE_PPTP_LINUX is not set
# BR2_PACKAGE_PROFTPD is not set
# BR2_PACKAGE_QUAGGA is not set
# BR2_PACKAGE_RSYNC is not set
BR2_PACKAGE_SAMBA=y

#
# Samba tools selection
#
BR2_PACKAGE_SAMBA_CIFS=y
BR2_PACKAGE_SAMBA_EVENTLOGADM=y

#
# findsmb       - disabled (requires nmblookup, smbclient and perl)
#
BR2_PACKAGE_SAMBA_NET=y
BR2_PACKAGE_SAMBA_NMBD=y
BR2_PACKAGE_SAMBA_NMBLOOKUP=y
BR2_PACKAGE_SAMBA_NTLM_AUTH=y
BR2_PACKAGE_SAMBA_PDBEDIT=y
BR2_PACKAGE_SAMBA_PROFILES=y
BR2_PACKAGE_SAMBA_RPCCLIENT=y
BR2_PACKAGE_SAMBA_SMBCACLS=y
BR2_PACKAGE_SAMBA_SMBCLIENT=y
BR2_PACKAGE_SAMBA_SMBCONTROL=y
BR2_PACKAGE_SAMBA_SMBCQUOTAS=y
BR2_PACKAGE_SAMBA_SMBGET=y
BR2_PACKAGE_SAMBA_SMBLDBTOOLS=y
BR2_PACKAGE_SAMBA_SMBPASSWD=y
BR2_PACKAGE_SAMBA_SMBSHARESEC=y
BR2_PACKAGE_SAMBA_SMBSPOOL=y
BR2_PACKAGE_SAMBA_SMBSTATUS=y
BR2_PACKAGE_SAMBA_SMBTREE=y
BR2_PACKAGE_SAMBA_SWAT=y
BR2_PACKAGE_SAMBA_SMBTAR=y
BR2_PACKAGE_SAMBA_TDB=y
BR2_PACKAGE_SAMBA_TESTPARM=y
BR2_PACKAGE_SAMBA_WINBINDD=y
BR2_PACKAGE_SAMBA_WBINFO=y

#
# Samba libraries selection
#
# BR2_PACKAGE_SAMBA_LIBSMBCLIENT is not set

#
# Samba support selection
#

#
# support avahi - disabled (requires avahi-daemon/dbus)
#

#
# support gamin - disabled (requires gamin)
#
# BR2_PACKAGE_SER2NET is not set
# BR2_PACKAGE_SOCAT is not set
# BR2_PACKAGE_SPAWN_FCGI is not set

#
# Squid requires a toolchain with C++ and IPv6 support enabled
#
# BR2_PACKAGE_TCPDUMP is not set
# BR2_PACKAGE_DHCPDUMP is not set
# BR2_PACKAGE_TCPREPLAY is not set
# BR2_PACKAGE_TN5250 is not set
# BR2_PACKAGE_TTCP is not set

#
# udpcast requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_VPNC is not set
# BR2_PACKAGE_VSFTPD is not set
# BR2_PACKAGE_VTUN is not set
# BR2_PACKAGE_WEBIF is not set
# BR2_PACKAGE_WIRELESS_TOOLS is not set
# BR2_PACKAGE_WPA_SUPPLICANT is not set

#
# Package managers
#
# BR2_PACKAGE_IPKG is not set

#
# Shell and utilities
#
# BR2_PACKAGE_AT is not set
# BR2_PACKAGE_DIALOG is not set
# BR2_PACKAGE_FILE is not set
# BR2_PACKAGE_LOCKFILE_PROGS is not set
# BR2_PACKAGE_LOGROTATE is not set
# BR2_PACKAGE_SCREEN is not set
# BR2_PACKAGE_SUDO is not set
# BR2_PACKAGE_WHICH is not set

#
# System tools
#

#
# Text editors and viewers
#
# BR2_PACKAGE_ED is not set
# BR2_PACKAGE_NANO is not set
BR2_PACKAGE_UEMACS=y

#
# Target filesystem options
#
BR2_ROOTFS_POST_BUILD_SCRIPT=""
BR2_ROOTFS_DEVICE_TABLE="target/generic/device_table.txt"
BR2_ROOTFS_SKELETON_DEFAULT=y
# BR2_ROOTFS_SKELETON_CUSTOM is not set
# BR2_TARGET_ROOTFS_CRAMFS is not set
# BR2_TARGET_ROOTFS_CLOOP is not set
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_BLOCKS=0
BR2_TARGET_ROOTFS_EXT2_INODES=0
BR2_TARGET_ROOTFS_EXT2_RESBLKS=0
BR2_TARGET_ROOTFS_EXT2_SQUASH=y
BR2_TARGET_ROOTFS_EXT2_NONE=y
# BR2_TARGET_ROOTFS_EXT2_GZIP is not set
# BR2_TARGET_ROOTFS_EXT2_BZIP2 is not set
# BR2_TARGET_ROOTFS_EXT2_LZMA is not set
# BR2_TARGET_ROOTFS_JFFS2 is not set
# BR2_TARGET_ROOTFS_UBIFS is not set
# BR2_TARGET_ROOTFS_SQUASHFS is not set
# BR2_TARGET_ROOTFS_TAR is not set
# BR2_TARGET_ROOTFS_CPIO is not set

#
# initramfs requires a Linux kernel to be built
#
# BR2_TARGET_ROOTFS_ROMFS is not set

#
# Bootloaders
#
# BR2_TARGET_BAREBOX is not set
# BR2_TARGET_UBOOT is not set
# BR2_TARGET_AT91BOOTSTRAP is not set
# BR2_TARGET_DATAFLASHBOOT is not set

#
# Kernel
#
# BR2_LINUX_KERNEL is not set