From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Mon, 21 Feb 2011 23:21:19 +0100 Subject: [Buildroot] No response after "Freeing init memory" In-Reply-To: References: Message-ID: <20110221232119.07dc234d@surf> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hello, On Mon, 21 Feb 2011 21:53:51 +0100 Zden?k Materna wrote: > I have problem with init. Kernel boots ok, but after message "Freeing init > memory: 120K" there is no response (*), but system seems to be up (it > responds to ping). I tried to change init=/linuxrc to init=/hello which is > statically compiled hello world and after that I got kernel panic (**). I > double checked all configuration, but I couldn't find nothing weird. I have > Generic serial port configured and console is also configured in inittab. > All is compiled with same toolchain with EABI. Where might be problem? > Thanks for any advice. > > My kernel command line: mem=64M console=ttyS0,115200 root=/dev/nfs rw > nfsroot=192.168.1.37:/home/zdenal/nfsroot/,proto=tcp ip=dhcp init=/linuxrc. > > Buildroot from git, kernel 2.6.33.7, uClibc 0.9.31, Busybox 1.18. Could you post your Buildroot .config and kernel .config files, and the full kernel boot log ? Thanks, Thomas -- Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com