From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Tue, 22 Feb 2011 19:55:33 +0100 Subject: [Buildroot] Problem when running a Qt program on AT91SAM9M10 In-Reply-To: <1759946353.864.1298362207553.JavaMail.root@Tesla.Syntronic.com> References: <1411107015.845.1298361874825.JavaMail.root@Tesla.Syntronic.com> <1759946353.864.1298362207553.JavaMail.root@Tesla.Syntronic.com> Message-ID: <20110222195533.1b8c6294@surf> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hello, On Tue, 22 Feb 2011 09:10:07 +0100 (CET) Anders Gabert wrote: > I have a problem when running a Qt example program on AT91SAM9M10. > > I?m using Buildroot 2010.11 and have selected and compiled Qt. > I get a bunch of Qt libs under usr/lib. > > To test Qt I have compiled the calculator under the example widgets > when running it on the unit a get the error below. As you can see > there are characters missing in the error text. When looking in the > Qt code, I think the last line should be ?Cannot create Qt for > Embedded Linux data directory: %s?. Has anyone had the same problem > or a solution to it. > > # ./calculator -qws I have just tested the calculator example on a simple ARM system built by Buildroot, and it works fine here in Qemu. Could you give some details: your Buildroot .config, and the procedure you use to build the calculator application. Regards, Thomas -- Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com