From: Torsten Mohr <tmohr@s.netic.de>
To: buildroot@busybox.net
Subject: [Buildroot] 2011.02, BeagleBoard-xM, linux-2.6.37 does not boot
Date: Sun, 20 Mar 2011 23:25:39 +0100 [thread overview]
Message-ID: <201103202325.39993.tmohr@s.netic.de> (raw)
Hi,
i configured and compiled buildroot-2011.02, which comes with 2.6.37 as the
default kernel setting. I chose this one and "omap2plus" as the defconfig
name.
u-boot.bin boots fine, but the kernel does not show any output. All i see is:
reading uImage
2929528 bytes read
Booting from mmc ...
## Booting kernel from Legacy Image at 82000000 ...
Image Name: Linux-2.6.37
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2929464 Bytes = 2.8 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
There's nothing more after this. I also tried "omap3" as defconfig (and
copied that 0map3_defconfig from a previous kernel, same result).
Not sure if i missed something, some questions came up:
- does buildroot use the correct kernel for BeagleBoard-xM?
- do i need to apply patches?
- what configuration file do i need to chose?
- does u-boot need special options to boot that kernel?
It would be great if anybody had some hints for me.
Best regards,
Torsten.
next reply other threads:[~2011-03-20 22:25 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-20 22:25 Torsten Mohr [this message]
2011-03-21 7:51 ` [Buildroot] 2011.02, BeagleBoard-xM, linux-2.6.37 does not boot Bob Liu
2011-03-21 21:43 ` Torsten Mohr
2011-03-22 4:35 ` [Buildroot] build without linux, busybox, - just buildroot internal toolchain Steve Calfee
2011-03-22 5:51 ` Baruch Siach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201103202325.39993.tmohr@s.netic.de \
--to=tmohr@s.netic.de \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox