From: Torsten Mohr <tmohr@s.netic.de>
To: buildroot@busybox.net
Subject: [Buildroot] BeagleBoard-xM, booting 2.6.37, root=/dev/mmcblk0p2, kernel hangs
Date: Wed, 23 Mar 2011 22:00:55 +0100 [thread overview]
Message-ID: <201103232200.55266.tmohr@s.netic.de> (raw)
Hello,
i've set up a micro SD card with VFAT on partition 1, EXT2 on partition 2.
Partition 2 is buildroot's output/images/rootfs.ext2, copied with "dd" to the
micro SD card.
On partition 1 i have u-boot and i start the kernel like this:
mmc init
mmc rescan 0
run loaduimage
bootm 0x82000000
Then i see the kernel boot log and i see it hanging:
[ 1.215850] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:05:25
UTC (946685125)
[ 1.226806] Waiting for root device /dev/mmcblk0p2...
[ 1.369873] mmc0: host does not support reading read-only switch. assuming
write-enable.
[ 1.389953] mmc0: new SDHC card at address e624
---> no more output
I use buildroot-2011.02, the kernel is 2.6.37.
In the kernel configuration i have set:
TI OMAP Multimedia Card Interface support (MMC_OMAP)
TI OMAP High Speed Multimedia Card Interface support (MMC_OMAP_HS)
Can anybody give me a hint why the kernel does not continue to boot?
Best regards,
Torsten.
next reply other threads:[~2011-03-23 21:00 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-23 21:00 Torsten Mohr [this message]
2011-03-23 21:33 ` [Buildroot] BeagleBoard-xM, booting 2.6.37, root=/dev/mmcblk0p2, kernel hangs bruce bushby
2011-03-23 22:10 ` Torsten Mohr
2011-03-23 22:53 ` bruce bushby
2011-03-23 23:31 ` Steve Calfee
2011-03-23 23:38 ` bruce bushby
2011-03-23 21:43 ` Steve Calfee
2011-03-23 22:19 ` Torsten Mohr
2011-03-24 21:19 ` [Buildroot] [beagleboard] " Torsten Mohr
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201103232200.55266.tmohr@s.netic.de \
--to=tmohr@s.netic.de \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox