From: Arnout Vandecappelle <arnout@mind.be>
To: buildroot@busybox.net
Subject: [Buildroot] Request for comments on packages for TI's OMAP3 and DM365 processors
Date: Tue, 18 Oct 2011 11:23:03 +0200 [thread overview]
Message-ID: <201110181123.03836.arnout@mind.be> (raw)
In-Reply-To: <1284746402-19186-1-git-send-email-pierreluc.simard@admetric.ca>
On Friday 17 September 2010 19:59:45, Pierre-Luc Simard wrote:
> Hello All,
>
> I'd like some comment on the packages I've made to support TI's gstreamer
> plugin for the OMAP3 and DM365 processors. All packages compile using
> crosstool-ng and glibc, I have not yet tested them with BR's own internal
> toolchain and the uclibc at the moment. If anybody wants to test these package
> I'll provide as much assistance as I can. I've publish my working branch at
> http://github.com/Admetric/buildroot
Reviving a year-old thread...
It seems these patches were never commented upon and also weren't
accepted. I'm going to pick them up again.
Although these patches still apply cleanly against the current master, there is probably some duplication with the TI things that were merged earlier this year. I will probably not find them all myself, so I hope there is someone on the list who can keep an eagle eye on such duplicates.
Regards,
Arnout
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286540
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 31BB CF53 8660 6F88 345D 54CC A836 5879 20D7 CF43
next prev parent reply other threads:[~2011-10-18 9:23 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-17 17:59 [Buildroot] Request for comments on packages for TI's OMAP3 and DM365 processors Pierre-Luc Simard
2010-09-17 17:59 ` [Buildroot] [PATCH 01/17] Basic frame to support TI's packages for OMAP and Davinci processors Pierre-Luc Simard
2010-09-17 17:59 ` [Buildroot] [PATCH 02/17] TI's DSP/BIOS Utilities Pierre-Luc Simard
2010-09-17 17:59 ` [Buildroot] [PATCH 03/17] TI's DSP Code Generation Tools Pierre-Luc Simard
2010-09-17 17:59 ` [Buildroot] [PATCH 04/17] TI's Codec Engine for TI ARM/DSP processors Pierre-Luc Simard
2010-09-17 17:59 ` [Buildroot] [PATCH 05/17] TI Codecs for the OMAP3 processor Pierre-Luc Simard
2010-09-17 17:59 ` [Buildroot] [PATCH 06/17] TI's Davinci Multimedia Application Interface (DMAI) for TI ARM/DSP processors Pierre-Luc Simard
2010-09-17 17:59 ` [Buildroot] [PATCH 07/17] TI's DSP/BIOS v5 Kernel Pierre-Luc Simard
2010-09-17 17:59 ` [Buildroot] [PATCH 08/17] Corrected the position of the ti-dspbios package in the menu Pierre-Luc Simard
2010-09-17 17:59 ` [Buildroot] [PATCH 09/17] DSPLink Inter-Processor Communications (IPC) for TI's processors Pierre-Luc Simard
2010-09-17 17:59 ` [Buildroot] [PATCH 10/17] TI's DVSDK for DM365 processors Pierre-Luc Simard
2010-09-17 17:59 ` [Buildroot] [PATCH 11/17] TI EDMA3 Low Level Driver (LLD) Pierre-Luc Simard
2010-09-17 17:59 ` [Buildroot] [PATCH 12/17] TI Framework Components Pierre-Luc Simard
2010-09-17 17:59 ` [Buildroot] [PATCH 13/17] GStreamer Plugin (gstreamer-ti) for TI ARM/DSP processors Pierre-Luc Simard
2010-09-17 17:59 ` [Buildroot] [PATCH 14/17] TI's MFP Linux utils Pierre-Luc Simard
2010-09-17 18:00 ` [Buildroot] [PATCH 15/17] TI's Local Power Manager (LPM) Pierre-Luc Simard
2010-09-17 18:00 ` [Buildroot] [PATCH 16/17] TI's eXpress DSP Algorithm Interface Standard (XDAIS) Pierre-Luc Simard
2010-09-17 18:00 ` [Buildroot] [PATCH 17/17] XDCtools Pierre-Luc Simard
2011-10-18 9:23 ` Arnout Vandecappelle [this message]
2011-10-18 10:28 ` [Buildroot] Request for comments on packages for TI's OMAP3 and DM365 processors Peter Korsgaard
2011-10-18 12:33 ` Arnout Vandecappelle
2011-10-18 12:41 ` Peter Korsgaard
2011-10-18 12:49 ` Thomas Petazzoni
2011-10-18 13:32 ` Gustavo Zacarias
-- strict thread matches above, loose matches on Subject: below --
2011-10-22 3:05 Damian Kaczmarek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201110181123.03836.arnout@mind.be \
--to=arnout@mind.be \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox