From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Mon, 21 Nov 2011 21:08:17 +0100 Subject: [Buildroot] help needed with realtek gigabit network adapter In-Reply-To: <4ECA8C28.1020306@neotion.com> References: <4ECA36CB.5010803@neotion.com> <1321879312.2085.18.camel@sven> <20111121134405.02151918@skate> <4ECA8C28.1020306@neotion.com> Message-ID: <20111121210817.5eddecc0@skate> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Le Mon, 21 Nov 2011 18:36:40 +0100, Emmanuel BOUAZIZ a ?crit : > I enabled mdev with loading firmware support and added a S30mdev file > in init.d with mount -t tmpfs -o size=64k,mode=0755 tmpfs /dev > echo /sbin/mdev > /proc/sys/kernel/hotplug > mdev -s All these steps are done automatically by Buildroot, if you select BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV. > The "irq 7: nobody cared" error is still there though. It was not > related after all. Any idea about that ? Buggy driver or hardware. Find out which device corresponds to IRQ 7, and then if a driver is supposed to manage this device or not. Best regards, Thomas -- Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com