From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Mon, 28 Nov 2011 13:39:33 +0100 Subject: [Buildroot] include the Xenomai in kernel linux In-Reply-To: References: Message-ID: <20111128133933.2dd3f976@skate> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Le Mon, 28 Nov 2011 12:24:42 +0000, Adriano Campos a ?crit : > In the 2011-08 version of buildroot works correctly using the configuration > file "buildroot-2011-08 \ config \ qemu_arm_versatile_defconfig" supplied > with the buildroot. However I need to apply the patch and Xenomai is not > possible in this version so I'm now using the buildroot version 2011-11-rc3, > but is not working. "is not working" is not precise enough to help you. Could you provide some details ? > With the same configuration file, the generated image does not run under > QEMU. Can you help? I'm not sure you realize that Xenomai is a patch against the kernel and that this patch is therefore only available for *certain* kernel versions. The kernel version used in qemu_arm_versatile_defconfig has no Xenomai patch available. If you want to use Xenomai, you *have* to use a kernel version that is explicitly supported by Xenomai, and the version supported by Xenomai depend on the architecture. Best regards, Thomas -- Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com