From mboxrd@z Thu Jan  1 00:00:00 1970
From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Date: Wed, 30 Nov 2011 23:49:06 +0100
Subject: [Buildroot] LIBFOO_SITE in .mk file
In-Reply-To: <001201ccafb0$4b5e06e0$0400a8c0@dspcgrnzks9p98>
References: <003b01cca958$91486a00$0400a8c0@dspcgrnzks9p98>
 <003801ccae12$a7781190$0400a8c0@dspcgrnzks9p98>
 <003901ccae1b$2d82f950$0400a8c0@dspcgrnzks9p98>
 <20111129083710.1a83fad6@skate>
 <001201ccaea3$3ad7df70$0400a8c0@dspcgrnzks9p98>
 <20111129153619.4f080721@skate>
 <001301ccaea5$37ec1f40$0400a8c0@dspcgrnzks9p98>
 <001401ccaedf$e5751f60$0400a8c0@dspcgrnzks9p98>
 <001501ccaee8$34c408d0$0400a8c0@dspcgrnzks9p98>
 <000b01ccaf79$085d0800$0400a8c0@dspcgrnzks9p98>
 <20111130170450.2f33e6c2@skate>
 <000c01ccaf7c$01f3c460$0400a8c0@dspcgrnzks9p98>
 <20111130173327.069f46fb@skate>
 <000d01ccaf7e$78243280$0400a8c0@dspcgrnzks9p98>
 <CAAXf6LV8ArEeuQ=w3r7745AK00t2XqtSoLqv+tBc9rnpjS8sCQ@mail.gmail.com>
 <000f01ccaf8b$7279ed90$0400a8c0@dspcgrnzks9p98>
 <CAAXf6LWSPgAR6C_+eqq5DZ5CCJkzJ22zpfyTzr7bNEGj-mOKYw@mail.gmail.com>
 <001101ccaf9a$cebe63b0$0400a8c0@dspcgrnzks9p98>
 <20111130232114.208390c8@skate>
 <001201ccafb0$4b5e06e0$0400a8c0@dspcgrnzks9p98>
Message-ID: <20111130234906.4f75994e@skate>
List-Id: <buildroot.busybox.net>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: buildroot@busybox.net

Hello,

Please don't reply to me directly, but use the list instead.

Le Wed, 30 Nov 2011 16:34:59 -0600,
"Jeff Krasky" <jeff.krasky@dspcg.com> a ?crit :

> > I have just posted a patch that adds the igh-ethercat package to
> > Buildroot. It applies on the latest Buildroot Git, which should become
> > in a few hours the 2011.11 release.
> 
> So if I:
> 
> wget http://buildroot.uclibc.org/downloads/buildroot-2011.11.tar.bz2
> 
> I can un-tar it, go into 'make menuconfig' and select EtherCAT and then it
> will build both the application and kernel module as part of the Linux
> image/filesystem?

After untarring the tarball, you have to apply the patch. The
igh-ethercat package is *not* part of the release.

> Right now I am building with 2.6.33, will I still be able to select that in
> buildroot-2011.11?

Buildroot allows you to select whatever kernel version you want.
However, none of the EtherCAT drivers seem to be supported for 2.6.33.

Thomas
-- 
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com