From mboxrd@z Thu Jan 1 00:00:00 1970 From: Arnout Vandecappelle Date: Fri, 13 Jan 2012 00:13:13 +0100 Subject: [Buildroot] [PATCH 7/7] sam-ba: new package with host variant only In-Reply-To: <20120102142959.0abeedb8@skate> References: <1325510735.2442.2.camel@emblysd024.adetel.com> <20120102142959.0abeedb8@skate> Message-ID: <201201130013.13601.arnout@mind.be> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On Monday 02 January 2012 14:29:59 Thomas Petazzoni wrote: > Hello Alexandre, > > Le Mon, 02 Jan 2012 14:25:35 +0100, > Alexandre Belloni a ?crit : > > > Shouldn't we go further and provide scripts to flash the boards using > > the > > default addresses used in at91bootstrap and u-boot ? > > Indeed, that would be the next step to improve the board support for > AT91 evaluation boards. You are welcome to contribute patches :-) Buildroot is missing post-image scripting in general. You will typically want to package the kernel and rootfs in a compressed and signed image that can be distributed and installed on the target. Or during development, you would like to untar it to the nfsroot. Regards, Arnout -- Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286540 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F