From mboxrd@z Thu Jan 1 00:00:00 1970 From: Arnout Vandecappelle Date: Mon, 16 Jan 2012 09:40:33 +0100 Subject: [Buildroot] [PATCH 01/14] Add x86_64 variants to BR2_GCC_TARGET_ARCH In-Reply-To: References: Message-ID: <201201160940.34437.arnout@mind.be> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On Tuesday 03 January 2012 21:22:42 Thomas Petazzoni wrote: > With the Sourcery CodeBench IA32/AMD64 toolchain, the proper -march= > switch must be passed. So, on x86_64, we make sure that > BR2_GCC_TARGET_ARCH gets defined to the correct value, just as we do > on x86. > > Signed-off-by: Thomas Petazzoni Reviewed-by: Arnout Vandecappelle (Essensium/Mind) This one will be useful for me even for buildroot-built toolchains... Regards, Arnout > --- > target/Config.in.arch | 5 +++++ > 1 files changed, 5 insertions(+), 0 deletions(-) > > diff --git a/target/Config.in.arch b/target/Config.in.arch > index 5e9fad4..7faa010 100644 > --- a/target/Config.in.arch > +++ b/target/Config.in.arch > @@ -659,6 +659,11 @@ config BR2_GCC_TARGET_ARCH > default athlon-4 if BR2_x86_athlon_4 > default winchip-c6 if BR2_x86_winchip_c6 > default winchip2 if BR2_x86_winchip2 > + default nocona if BR2_x86_64_nocona > + default core2 if BR2_x86_64_core2 > + default k8 if BR2_x86_64_opteron > + default k8-sse3 if BR2_x86_64_opteron_sse3 > + default barcelona if BR2_x86_64_barcelona > default c3 if BR2_x86_c3 > default c3-2 if BR2_x86_c32 > default geode if BR2_x86_geode > -- Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286540 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F