From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Thu, 2 Feb 2012 16:47:43 +0100 Subject: [Buildroot] [git commit] boot: only show vendor-specific bootloaders for applicable arm variant In-Reply-To: <20120201224701.C13259097B@busybox.osuosl.org> References: <20120201224701.C13259097B@busybox.osuosl.org> Message-ID: <20120202164743.30dfab12@skate> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hello, Le Wed, 1 Feb 2012 23:46:48 +0100, Peter Korsgaard a ?crit : > Atmel at91sam9 and NXP lpc32xx are both all arm926t, so only show > then if that arm variant is selected. Technically this is correct, but I am pretty sure a lot of people keep the default "generic_arm" and therefore would not see the availability of AT91Bootstrap or the LPC bootloaders. For example, if you use a CodeSourcery external toolchain, there is basically no difference between generic_arm and arm926t, because the toolchain already defaults to armv5t. Thomas -- Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com