From mboxrd@z Thu Jan 1 00:00:00 1970 From: Arnout Vandecappelle Date: Tue, 7 Feb 2012 18:08:21 +0100 Subject: [Buildroot] [PATCH] Add Freescale MX53 support In-Reply-To: <1328609206.18704.12.camel@mathieu-OptiPlex-745> References: <1328273223-16093-1-git-send-email-mbriand@adeneo-embedded.com> <8762fjt2m7.fsf@macbook.be.48ers.dk> <1328609206.18704.12.camel@mathieu-OptiPlex-745> Message-ID: <201202071808.21506.arnout@mind.be> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On Tuesday 07 February 2012 11:06:46 Mathieu wrote: > On Tue, 2012-02-07 at 10:27 +0100, Peter Korsgaard wrote: > > >>>>> "Arnout" == Arnout Vandecappelle writes: > > > >> diff --git a/board/freescale/mx53loco/linux.config b/board/freescale/mx53loco/linux.config > > Arnout> Personally I'd prefer to use a kernel defconfig (mx5_defconfig), but > > Arnout> perhaps this one is more appropriate. > > > > I agree if possible, as that's one thing less to maintain. > > > > There are two differences between mx5_defconfig and this defconfig : > - mx5_defconfig include several BSPs which result in a failure in uImage > building (multiple load addresses). > - CONFIG_MMC_BLOCK is set as module in mx5_defconfig. Since mx53 has no > nand memory, this seemed relevant. Fair enough. It would be good to document this in the log message. Regards, Arnout -- Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286540 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F -------------- next part -------------- An HTML attachment was scrubbed... URL: