From: Arnout Vandecappelle <arnout@mind.be>
To: buildroot@busybox.net
Subject: [Buildroot] [RFC PATCH 6/6] apply-patches.sh: change archive management
Date: Fri, 10 Feb 2012 23:48:08 +0100 [thread overview]
Message-ID: <201202102348.08459.arnout@mind.be> (raw)
In-Reply-To: <76267ac6ba3ddac4379b9896f72875dedd455ebd.1328492511.git.ludovic.desroches@atmel.com>
On Monday 06 February 2012 02:47:19 ludovic.desroches at atmel.com wrote:
> From: Ludovic Desroches <ludovic.desroches@atmel.com>
>
> The way archives were managed was incorrect because the uncompressed archives
> were sent directly to patch command. It means that alphabetical patch orderwas
> not respected.
>
> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
> ---
> support/scripts/apply-patches.sh | 15 +++++++++++----
> 1 files changed, 11 insertions(+), 4 deletions(-)
>
> diff --git a/support/scripts/apply-patches.sh b/support/scripts/apply-patches.sh
> index 3a73ab9..9c2fbb3 100755
> --- a/support/scripts/apply-patches.sh
> +++ b/support/scripts/apply-patches.sh
> @@ -25,10 +25,6 @@ function apply_patch {
> type="zip"; uncomp="unzip -d"; ;;
> *.Z)
> type="compress"; uncomp="uncompress -c"; ;;
> - *.tgz)
> - type="tar gzip"; uncomp="gunzip -dc"; apply="tar xvf - -C"; ;;
> - *.tar)
> - type="tar"; uncomp="cat"; apply="tar xvf - -C"; ;;
> *)
> type="plaintext"; uncomp="cat"; ;;
> esac
> @@ -50,6 +46,17 @@ function scan_patchdir {
> for i in `cd $path; ls -d $patches 2> /dev/null` ; do
> if [ -d "${path}/$i" ] ; then
> scan_patchdir "${path}/$i"
> + elif echo "$i" | grep -q -E "tar\.bz$|tbz$|tar.\bz2$|tbz2$|tar\.gz$|tgz$" ; then
Wouldn't '\.tar(\..*)?$|\.tbz2?$|\.tgz$' be a better pattern?
> + unpackedarchivedir="$builddir/.patches-$(basename $i)-unpacked"
> + rm -rf "$unpackedarchivedir" 2> /dev/null
> + mkdir "$unpackedarchivedir"
> + if echo "$i" | grep "tar\.bz$|tbz$|tar\.bz2$|.tbz2$" ; then
> + tar_options="-xjf"
> + else
> + tar_options="-xzf"
> + fi
You can also use tar -xaf, which selects compression automatically.
> + tar -C "$unpackedarchivedir" --strip-components=1 $tar_options "${path}/$i"
> + scan_patchdir "$unpackedarchivedir"
> else
> apply_patch "$path" "$i" || exit 1
> fi
>
Regards,
Arnout
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286540
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20120210/ce0cbfda/attachment.html>
next prev parent reply other threads:[~2012-02-10 22:48 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-06 1:47 [Buildroot] [RFC PATCH]apply-patches.sh: big update (new directory and archive management) ludovic.desroches at atmel.com
2012-02-06 1:47 ` [Buildroot] [RFC PATCH 1/6] apply-patches.sh: check if there are rejects before applying patches ludovic.desroches at atmel.com
2012-02-10 21:43 ` Arnout Vandecappelle
2012-02-15 16:55 ` Ludovic Desroches
2012-02-15 22:33 ` [Buildroot] [RFC PATCH v2 " ludovic.desroches at atmel.com
2012-02-15 20:56 ` Arnout Vandecappelle
2012-02-06 1:47 ` [Buildroot] [RFC PATCH 2/6] apply-patches.sh: rename targetdir to builddir ludovic.desroches at atmel.com
2012-02-10 21:45 ` Arnout Vandecappelle
2012-02-06 1:47 ` [Buildroot] [RFC PATCH 3/6] apply-patches.sh: cleanup ludovic.desroches at atmel.com
2012-02-10 21:45 ` Arnout Vandecappelle
2012-02-06 1:47 ` [Buildroot] [RFC PATCH 4/6] apply-patches.sh: directories are considered as a collection of patches ludovic.desroches at atmel.com
2012-02-10 22:40 ` Arnout Vandecappelle
2012-02-15 16:51 ` Ludovic Desroches
2012-02-15 23:06 ` [Buildroot] [RFC PATCH v2 " ludovic.desroches at atmel.com
2012-02-15 23:49 ` Arnout Vandecappelle
2012-02-16 7:56 ` Ludovic Desroches
2012-02-16 8:49 ` [Buildroot] [RFC PATCH " Ludovic Desroches
2012-02-16 9:45 ` Arnout Vandecappelle
2012-02-06 1:47 ` [Buildroot] [RFC PATCH 5/6] apply-patches.sh: add recursivity when scanning patchdir ludovic.desroches at atmel.com
2012-02-06 1:47 ` [Buildroot] [RFC PATCH 6/6] apply-patches.sh: change archive management ludovic.desroches at atmel.com
2012-02-10 22:48 ` Arnout Vandecappelle [this message]
2012-02-15 16:54 ` Ludovic Desroches
2012-02-15 23:09 ` [Buildroot] [RFC PATCH v2 " ludovic.desroches at atmel.com
2012-02-15 23:54 ` Arnout Vandecappelle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201202102348.08459.arnout@mind.be \
--to=arnout@mind.be \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox