From mboxrd@z Thu Jan 1 00:00:00 1970 From: Arnout Vandecappelle Date: Sun, 12 Feb 2012 23:29:36 +0100 Subject: [Buildroot] [PATCH v3-resend 2/2] new program: usb_modeswitch_data In-Reply-To: <1329073793-524-2-git-send-email-jwoltz@gmail.com> References: <1329073793-524-1-git-send-email-jwoltz@gmail.com> <1329073793-524-2-git-send-email-jwoltz@gmail.com> Message-ID: <201202122329.36300.arnout@mind.be> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On Sunday 12 February 2012 20:09:53 J.C. Woltz wrote: > usb_modeswitch_data provides udev rules for usb VID/PID combinations to > switch usb deices from their default mode into a more useable mode. The > default mode usually is a cdrom with installation software that is of > little use in an embedded linux situation > > Signed-off-by: J.C. Woltz > > Fix usb_modeswitch_data to depend usb_modeswitch > add $(TARGET_CONFIGURE_OPTS) to be consistent with usb_modeswitch Err... You just changed it into TARGET_CONFIGURE_ENV in usb_modeswitch... [snip] > +++ b/package/usb_modeswitch_data/Config.in > @@ -0,0 +1,8 @@ > +config BR2_PACKAGE_USB_MODESWITCH_DATA > + depends on BR2_PACKAGE_USB_MODESWITCH Can we have a third opinion on whether this should be depends or select? Regards, Arnout -- Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286540 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F