From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean-Christophe PLAGNIOL-VILLARD Date: Fri, 24 Feb 2012 16:38:36 +0100 Subject: [Buildroot] Compile Linux with Buildroot for i.MX28 EVK In-Reply-To: References: <63D6870D443E63419AC4A0C97B86C092030FCA15@MBXCLUSTER.mdh.local> <20120223123856.GG26667@sapphire.tkos.co.il> <63D6870D443E63419AC4A0C97B86C092030FCA18@MBXCLUSTER.mdh.local> <20120223171716.GA5622@tarshish> <63D6870D443E63419AC4A0C97B86C092030FCA22@MBXCLUSTER.mdh.local> Message-ID: <20120224153836.GA6613@game.jcrosoft.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On 14:33 Fri 24 Feb , Yegor Yefremov wrote: > AFAIK it is always uImage format for both u-boot and barebox. RedBoot > has used zImage. barebox can load zimage or uImage Best Regrds, J. > > Yegor > > On Fri, Feb 24, 2012 at 2:19 PM, Mikael ?sberg wrote: > > Hey, > > > > Ok great, thx! > > > > One last thing, depending on which bootloader that is used, i.e., u-boot, barebox etc., does it matter which kernel image that is used for the boot (zImage, uImage, vmlinux)? > > If I use barebox, which image can I use? (I prefer an uncompressed kernel) > > > > Kind regards > > > > -------------------------------------------------------------- > > Mikael ?sberg > > PhD student (Doktorand), Computer Engineering > > School of Innovation, Design and Engineering > > M?lardalen University, V?ster?s Sweden > > Phone: +46(0)21 101502 > > Room nr: U1-145 > > Mail: mikael.asberg at mdh.se > > -------------------------------------------------------------- > > ________________________________________ > > Fr?n: Baruch Siach [baruch at tkos.co.il] > > Skickat: den 23 februari 2012 18:17 > > Till: Mikael ?sberg > > Kopia: buildroot at busybox.net > > ?mne: Re: SV: [Buildroot] Compile Linux with Buildroot for i.MX28 EVK > > > > Hi Mikael, > > > > Please keep the list in Cc. > > > > On Thu, Feb 23, 2012 at 02:35:37PM +0100, Mikael ?sberg wrote: > >> Hi, > >> > >> Thanks a lot for the info! > >> > >> I guess its easier to use Barebox, then you just also specify mxs_defconfig > >> when you configure. > > > > You original question was about the Linux kernel not Barebox. > > > > Barebox includes support for the TX28 board which is based on i.MX28 > > (tx28stk5_defconfig). > > > >> One more thing, since i.MX28 uses the "454MHz ARM926EJ-S" processor, should > >> I choose "arm926t" in the config? > > > > The kernel (and Barebox) defconfig files should include all the relevant > > settings, including this one. > > > > baruch > > > >> Fr?n: Baruch Siach [baruch at tkos.co.il] > >> Skickat: den 23 februari 2012 13:38 > >> Till: Mikael ?sberg > >> Kopia: buildroot at busybox.net > >> ?mne: Re: [Buildroot] Compile Linux with Buildroot for i.MX28 EVK > >> > >> Hi Mikael, > >> > >> On Thu, Feb 23, 2012 at 12:22:09PM +0100, Mikael ?sberg wrote: > >> > Does anyone have experience with compiling Linux kernels with Buildroot for > >> > i.MX28 EVK? > >> > I'm not sure which board name to be set for u-boot for example... > >> > Also, which defconfig should be used, imx27ads_defconfig or versatile_defconfig perhaps? > >> > > >> > Any help or pointers would be valueable! > >> > >> Although it's named i.MX28, this chip is very different from i.MX27, but is > >> similar to i.MX23. Latest kernels (since v3.0) contain mxs_defconfig, which > >> should be suitable for i.MX28 (and i.MX23). > >> > >> baruch > > > > -- > > ? ? http://baruch.siach.name/blog/ ? ? ? ? ? ? ? ? ?~. .~ ? Tk Open Systems > > =}------------------------------------------------ooO--U--Ooo------------{= > > ? - baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il - > > _______________________________________________ > > buildroot mailing list > > buildroot at busybox.net > > http://lists.busybox.net/mailman/listinfo/buildroot > _______________________________________________ > buildroot mailing list > buildroot at busybox.net > http://lists.busybox.net/mailman/listinfo/buildroot