From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To: buildroot@busybox.net
Subject: [Buildroot] [U-Boot] Craneboard with Uboot and xloader
Date: Tue, 6 Mar 2012 11:26:02 +0100 [thread overview]
Message-ID: <20120306112602.708a7430@skate> (raw)
In-Reply-To: <CABMxt4itAFJLs+qQXf9g5sKGUq7+S-uXJuzfHFiZ+_wRSSwo_g@mail.gmail.com>
Le Tue, 6 Mar 2012 11:22:33 +0100,
Mohamed HAMZAOUI <requinham@gmail.com> a ?crit :
> I'm sorry for posting u-boot mailing list.
But please keep the Buildroot list in copy.
> After compiling a new compilation with Buildroot and with kernel
> 2.6.39.4 on Craneboard, i have a strange problem in booting the
> kernel "Kernel panic...".
Typically, your kernel panic below has absolutely nothing to do with
Buildroot. It's just the kernel that doesn't work properly on your
hardware platform. So:
*) If your kernel comes from a vendor, contact the vendor for support
*) If your kernel is the mainline kernel, then try with the latest
stable version (2.9.39.4 is getting old), and if you still have the
problem, contact the maintainers of your board inside the kernel.
For the Buildroot list subscribers, I'm keeping the kernel panic below.
> Registering the dns_resolver key type
> VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev
> 1 Unable to handle kernel NULL pointer dereference at virtual address
> 0000002a pgd = c0004000
> [0000002a] *pgd=00000000
> Internal error: Oops: 5 [#1]
> last sysfs file:
> Modules linked in:
> CPU: 0 Tainted: G W (2.6.39.4 #1)
> PC is at twl_i2c_read+0x38/0x11c
> LR is at omap3_twl_set_sr_bit+0x34/0x9c
> pc : [<c01edd94>] lr : [<c000ff80>] psr: 00000013
> sp : cf41df50 ip : 22222222 fp : 00000001
> r10: 00000000 r9 : 0000002a r8 : 00000000
> r7 : 00000000 r6 : 00000001 r5 : c0491b08 r4 : c0482318
> r3 : 00000000 r2 : 00000006 r1 : cf41df8f r0 : 00000015
> Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
> Control: 10c5387d Table: 80004019 DAC: 00000015
> Process swapper (pid: 1, stack limit = 0xcf41c2e8)
> Stack: (0xcf41df50 to 0xcf41e000)
> df40: cf41df8f 00000006 c0446248
> c0446250
> df60: cf4203c0 c0482318 00000001 c003fbd0 00000000 00000000 00000000
> 00000000
> df80: 00000000 c000ff80 00000001 0000f472 00000000 c0482318 c000f664
> c0010034
> dfa0: c0482318 c000f670 c0028a58 c00343a0 c0032fd8 00003539 00000000
> c0030000
> dfc0: 00000013 c0028a58 c0028a9c c003fbd0 00000013 00000000 00000000
> 00000000
> dfe0: 00000000 c0008550 00000000 c00084c0 c003fbd0 c003fbd0 3b7fcee6
> f6b9b1b9
> [<c01edd94>] (twl_i2c_read+0x38/0x11c) from [<c000ff80>]
> (omap3_twl_set_sr_bit+0x34/0x9c)
> [<c000ff80>] (omap3_twl_set_sr_bit+0x34/0x9c) from [<c0010034>]
> (omap3_twl_init+0x4c/0x88)
> [<c0010034>] (omap3_twl_init+0x4c/0x88) from [<c000f670>]
> (omap2_common_pm_late_init+0xc/0x50)
> [<c000f670>] (omap2_common_pm_late_init+0xc/0x50) from [<c00343a0>]
> (do_one_initcall+0x94/0x164)
> [<c00343a0>] (do_one_initcall+0x94/0x164) from [<c0008550>]
> (kernel_init+0x90/0x13c)
> [<c0008550>] (kernel_init+0x90/0x13c) from [<c003fbd0>]
> (kernel_thread_exit+0x0/0x8)
> Code: e1a09080 e5d56008 e5953004 e2366001 (e7d32080)
> ---[ end trace 1b75b31a2719ed23 ]---
> Kernel panic - not syncing: Attempted to kill init!
Best regards,
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
next prev parent reply other threads:[~2012-03-06 10:26 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-24 9:25 [Buildroot] [U-Boot] Craneboard with Uboot and xloader Mohamed HAMZAOUI
[not found] ` <20120224150232.GA2346@bill-the-cat>
2012-02-24 20:08 ` Mohamed HAMZAOUI
[not found] ` <CA+M6bXk7yKi8VFQRbYT-SQZMwM9eneBzjx2NB9KpHeicxkDb9Q@mail.gmail.com>
2012-02-25 0:01 ` Mohamed HAMZAOUI
[not found] ` <CA+M6bX=A1Mie8Q093Sa3bp_hSxSRFR6z4-sNBvJP3982e_HPqQ@mail.gmail.com>
2012-02-25 13:00 ` Mohamed HAMZAOUI
[not found] ` <CA+M6bXktYKXisQEiS11CNixozV7KtzwajKsXyTPNXSEOjxz3AA@mail.gmail.com>
2012-02-26 0:26 ` Mohamed HAMZAOUI
2012-02-28 8:53 ` Mohamed HAMZAOUI
[not found] ` <CA+M6bXnNxFhzQpDOQhuSM7VKEh41dazMmUeEv=VTdVUuNoQhAw@mail.gmail.com>
[not found] ` <CABMxt4ixVGvV_LvduJSNmWevxiEvFv0GdRHpomK325bKp4T20A@mail.gmail.com>
[not found] ` <4F550BC3.80601@ti.com>
2012-03-06 9:19 ` Mohamed HAMZAOUI
2012-03-06 9:33 ` Thomas Petazzoni
2012-03-06 9:58 ` Mohamed HAMZAOUI
2012-03-06 10:01 ` Thomas Petazzoni
[not found] ` <CABMxt4itAFJLs+qQXf9g5sKGUq7+S-uXJuzfHFiZ+_wRSSwo_g@mail.gmail.com>
2012-03-06 10:26 ` Thomas Petazzoni [this message]
[not found] ` <4F562392.5070606@ti.com>
2012-03-07 9:37 ` Mohamed HAMZAOUI
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120306112602.708a7430@skate \
--to=thomas.petazzoni@free-electrons.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox