From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Tue, 13 Mar 2012 07:53:05 +0100 Subject: [Buildroot] [PATCH] Add (Freescale) elftosb host package In-Reply-To: <73E430A1-7C75-4E82-9A74-5771BC39AB48@armadeus.org> References: <1331560507-12444-1-git-send-email-eric.jarrige@armadeus.org> <20120312183241.56f78a30@skate> <73E430A1-7C75-4E82-9A74-5771BC39AB48@armadeus.org> Message-ID: <20120313075305.47f9f00c@skate> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Le Tue, 13 Mar 2012 00:13:53 +0100, Eric Jarrige a ?crit : > I have the plan to send another patch to support the u-boot.sb binary file > format that will depend on this host tool. Ok, good. Would it be possible to post the patch adding the elftosb tool together with a patch adding this u-boot.sb support? Of course, this should be two separate patches, but sent together. > The new apf28 board will also use this .sb binary file format and the elftosb > tool. It also possible to package the linux kernel with this tool for some CPUs > but for the time being that is not in my plan. > I do not know if this can be useful to have it in a user submenu. As long as it is used somewhere as a dependency for something, then it's fine. Thanks, Thomas -- Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com