From mboxrd@z Thu Jan 1 00:00:00 1970 From: Baruch Siach Date: Tue, 2 Oct 2012 02:09:51 +0200 Subject: [Buildroot] buildroot-2012.08: Error when selecting crosstool-ng In-Reply-To: References: Message-ID: <20121002000951.GA4689@tarshish> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hi Zvi, On Tue, Oct 02, 2012 at 01:25:11AM +0200, Zvi Vered wrote: > I'm using buildroot-2012.08 to create toolchain + file system for an x86 > target. > > When I set toolchain to: buildroot, the build was OK. > > Then I changed to: crosstool-ng and got the following error: Questions related to crosstool-ng should go to the crossgcc mailing list. See under "Contacts" at http://crosstool-ng.org/. [snip] > The reason I changed to crosstool-ng is that I want to use glibc and not > ulibc. > > Attached the .config I'm using. You say you want glibc toolchain, but your .config indicates otherwise: BR2_TOOLCHAIN_CTNG_uClibc=y # BR2_TOOLCHAIN_CTNG_eglibc is not set # BR2_TOOLCHAIN_CTNG_glibc is not set > Can you help ? An alternative to building a toolchain from scratch is to use a pre-built toolchain as external toolchain. Buildroot can even download and install the Sourcery CodeBench toolchain for you. Just select "External toolchain" in Toolchain -> Toolchain type, and then select from the options in the "Toolchain" choice menu. baruch -- http://baruch.siach.name/blog/ ~. .~ Tk Open Systems =}------------------------------------------------ooO--U--Ooo------------{= - baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -