From mboxrd@z Thu Jan  1 00:00:00 1970
From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Date: Fri, 5 Oct 2012 09:49:49 +0200
Subject: [Buildroot] R: buildroot Digest, Vol 76, Issue 25
In-Reply-To: <9551168.4238871349414166587.JavaMail.root@wmail37>
References: <9551168.4238871349414166587.JavaMail.root@wmail37>
Message-ID: <20121005094949.253fe41b@skate>
List-Id: <buildroot.busybox.net>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: buildroot@busybox.net


On Fri, 5 Oct 2012 07:16:06 +0200 (CEST), SGACE at libero.it wrote:
> Hi, i'm using an olimex usb-h and a lpc1766 board (You can see my 
> configuration 
> on the bottom of the page). When i launch the openocd daemon it
> "works"  (see terminal response 1). Then i try to make the  gdb
> connect and i get th terminal 
> response 2 (wich u can see on the bottom under terminal response 2).
> I don't get why it doesn't connect since with telnet it does so. I
> don't also know if this is the correct mailing list to forward this
> problem, if not feel free to ignore my message.

It is indeed not the correct mailing list. Please contact the OpenOCD
mailing list instead.

Best regards,

Thomas
-- 
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com