From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Mon, 12 Nov 2012 11:24:16 +0100 Subject: [Buildroot] arm920t Linux implementation In-Reply-To: <801077173.321754841.1352707282691.JavaMail.root@zimbra29-e5.priv.proxad.net> References: <803750442.321754226.1352707257219.JavaMail.root@zimbra29-e5.priv.proxad.net> <801077173.321754841.1352707282691.JavaMail.root@zimbra29-e5.priv.proxad.net> Message-ID: <20121112112416.0e1b9630@skate> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Lionel, On Mon, 12 Nov 2012 09:01:22 +0100 (CET), lionel.jourdren at free.fr wrote: > I?m trying to build up a configuration for a card embedding an ARM > AT91RM9200 processor. > > I?d like it to work in little endian mode, and expect to get a zImage > and initrd file for a linux 2.6.38/uClibC 0.9.31 > > From what I understood it seems that it?s not necessary to set > BR2_TARGET_ROOTFS_INITRAMFS (which should embedd initramfs in zImage) > > Could someone have a quick look to the configuration below, and see > if I?ve done something wrong ? At first sight, nothing looks particularly wrong in your configuration. But you're not explaining the problem(s) you're facing... so it's hard to help you. Or are you just seeking a theoretical confirmation that you configuration looks not too bad? Best regards, Thomas -- Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com