From mboxrd@z Thu Jan  1 00:00:00 1970
From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Date: Mon, 21 Jan 2013 18:11:39 +0100
Subject: [Buildroot] root.fs tar fails on 2012.11 and 2013.x from today
In-Reply-To: <CAG6aBkX8i42SpZAeQ2oPBZOMdT+V125Nadr_OFMoVzNJCda+9Q@mail.gmail.com>
References: <CAG6aBkUKBBWJPAmQaP_scR4-7o=uLuu69vdp0nANVuoDhRnQCg@mail.gmail.com>
 <20130119000053.3f7eebc1@skate>
 <CAG6aBkX8i42SpZAeQ2oPBZOMdT+V125Nadr_OFMoVzNJCda+9Q@mail.gmail.com>
Message-ID: <20130121181139.09c586ce@skate>
List-Id: <buildroot.busybox.net>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: buildroot@busybox.net

Dear Nigel Sollars,

On Mon, 21 Jan 2013 12:02:02 -0500, Nigel Sollars wrote:

> Confirmed the config file as per menuconfig from the git checkout is
> still pointing to the older location.

Not sure what you mean exactly. If you remove your configuration and
start a fresh one, it will automatically have the new location for the
device table. However, if you keep your existing configuration, then
there is nothing that will automatically "update" it to the new
defaults.

Best regards,

Thomas
-- 
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com