From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH 1/1] openpgm: new package
Date: Tue, 12 Feb 2013 11:53:05 +0100 [thread overview]
Message-ID: <20130212115305.3c4b6990@skate> (raw)
In-Reply-To: <1360666051-16475-2-git-send-email-alexander.lukichev@gmail.com>
Dear Alexander Lukichev,
Looks really good now. The only thing missing I believe is a
description + Signed-off-by line in the
package/openpgm/openpgm-cross-compile.patch file.
Also, did you test this package against uClibc or glibc? If against
glibc, then you should make a test against a minimal uClibc
configuration (no thread, no largefile, no IPv6, no RPC, no wchar, no
locale), to check that your package indeed doesn't depend on any of
these uClibc features. If you don't want to build a minimal uClibc
toolchain from scratch, you may use
http://autobuild.buildroot.org/toolchains/tarballs/br-arm-basic.tar.bz2.
Best regards,
Thomas
On Tue, 12 Feb 2013 12:47:31 +0200, Alexander Lukichev wrote:
> From: Alexander Lukichev <alexander.lukichev@espotel.com>
>
> OpenPGM is an open source implementation of the Pragmatic General
> Multicast (PGM) specification in RFC 3208 available at www.ietf.org.
> It is required for PGM/EPGM support in ZeroMQ library.
>
> Signed-off-by: Alexander Lukichev <alexander.lukichev@gmail.com>
> ---
> package/Config.in | 1 +
> package/openpgm/Config.in | 10 ++++++++++
> package/openpgm/openpgm-cross-compile.patch | 30 +++++++++++++++++++++++++++++
> package/openpgm/openpgm.mk | 18 +++++++++++++++++
> 4 files changed, 59 insertions(+)
> create mode 100644 package/openpgm/Config.in
> create mode 100644 package/openpgm/openpgm-cross-compile.patch
> create mode 100644 package/openpgm/openpgm.mk
>
> diff --git a/package/Config.in b/package/Config.in
> index 2fad94d..bfaf944 100644
> --- a/package/Config.in
> +++ b/package/Config.in
> @@ -524,6 +524,7 @@ source "package/libtorrent/Config.in"
> source "package/libupnp/Config.in"
> source "package/libvncserver/Config.in"
> source "package/nss-mdns/Config.in"
> +source "package/openpgm/Config.in"
> source "package/ortp/Config.in"
> source "package/slirp/Config.in"
> source "package/usbredir/Config.in"
> diff --git a/package/openpgm/Config.in b/package/openpgm/Config.in
> new file mode 100644
> index 0000000..e9e5ee6
> --- /dev/null
> +++ b/package/openpgm/Config.in
> @@ -0,0 +1,10 @@
> +config BR2_PACKAGE_OPENPGM
> + bool "OpenPGM"
> + help
> + OpenPGM is an open source implementation of the Pragmatic General
> + Multicast (PGM) specification in RFC 3208 available at www.ietf.org.
> + PGM is a reliable and scalable multicast protocol that enables
> + receivers to detect loss, request retransmission of lost data, or
> + notify an application of unrecoverable loss.
> +
> + http://code.google.com/p/openpgm/
> diff --git a/package/openpgm/openpgm-cross-compile.patch b/package/openpgm/openpgm-cross-compile.patch
> new file mode 100644
> index 0000000..67fc9cf
> --- /dev/null
> +++ b/package/openpgm/openpgm-cross-compile.patch
> @@ -0,0 +1,30 @@
> +--- a/openpgm/pgm/configure.ac 2011-09-27 20:59:08.000000000 +0300
> ++++ b/openpgm/pgm/configure.ac 2013-02-12 10:33:53.000000000 +0200
> +@@ -272,14 +272,19 @@ uint32_t add32_with_carry (uint32_t a, u
> + ;;
> + esac
> + # ticket spinlock friendly: unaligned pointers & atomic ops (excl. Sun Pro)
> +-AC_MSG_CHECKING([for unaligned pointers])
> +-AC_RUN_IFELSE(
> +- [AC_LANG_PROGRAM([[char* nezumi = "mouse";]],
> +- [[short x = *(short*)(nezumi + 2)]])],
> +- [AC_MSG_RESULT([yes])
> +- pgm_unaligned_pointers=yes],
> +- [AC_MSG_RESULT([no])
> +- pgm_unaligned_pointers=no])
> ++AC_CACHE_CHECK([if unaligned access fails], [ac_cv_lbl_unaligned_fail],
> ++ [AC_RUN_IFELSE(
> ++ [AC_LANG_PROGRAM([[char* nezumi = "mouse";]],
> ++ [[short x = *(short*)(nezumi + 2)]])],
> ++ [ac_cv_lbl_unaligned_fail=no],
> ++ [ac_cv_lbl_unaligned_fail=yes],
> ++ [ac_cv_lbl_unaligned_fail=yes])
> ++ ])
> ++if test "$ac_cv_lbl_unaligned_fail" = yes; then
> ++ pgm_unaligned_pointers=no
> ++else
> ++ pgm_unaligned_pointers=yes
> ++fi
> + AC_MSG_CHECKING([for intrinsic atomic ops])
> + # AC_PREPROC_IFELSE not always portable
> + AC_COMPILE_IFELSE(
> diff --git a/package/openpgm/openpgm.mk b/package/openpgm/openpgm.mk
> new file mode 100644
> index 0000000..34c5965
> --- /dev/null
> +++ b/package/openpgm/openpgm.mk
> @@ -0,0 +1,18 @@
> +#############################################################
> +#
> +# openpgm
> +#
> +#############################################################
> +
> +OPENPGM_VERSION = 5.2.121~dfsg
> +OPENPGM_SOURCE = libpgm-$(OPENPGM_VERSION).tar.gz
> +OPENPGM_SITE = http://openpgm.googlecode.com/files/
> +OPENPGM_LICENSE = LGPLv2.1+
> +OPENPGM_LICENSE_FILES = openpgm/pgm/LICENSE
> +OPENPGM_INSTALL_STAGING = YES
> +OPENPGM_AUTORECONF = YES
> +OPENPGM_SUBDIR = openpgm/pgm/
> +OPENPGM_CONF_ENV = ac_cv_file__proc_cpuinfo=yes ac_cv_file__dev_rtc=no \
> + ac_cv_file__dev_hpet=no
> +
> +$(eval $(autotools-package))
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
next prev parent reply other threads:[~2013-02-12 10:53 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-12 10:47 [Buildroot] [PATCH 0/1] [Re-submitted] openpgm: new package Alexander Lukichev
2013-02-12 10:47 ` [Buildroot] [PATCH 1/1] " Alexander Lukichev
2013-02-12 10:53 ` Thomas Petazzoni [this message]
2013-02-12 10:57 ` Alexander Lukichev
2013-02-12 17:47 ` Arnout Vandecappelle
2013-02-13 7:30 ` Alexander Lukichev
-- strict thread matches above, loose matches on Subject: below --
2013-02-11 12:30 Alexander Lukichev
2013-02-11 12:45 ` Thomas Petazzoni
2013-02-11 12:49 ` Yann E. MORIN
2013-02-11 12:54 ` Thomas Petazzoni
2013-02-11 13:18 ` Alexander Lukichev
2013-02-11 14:14 ` Thomas Petazzoni
2013-02-12 10:08 ` Alexander Lukichev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130212115305.3c4b6990@skate \
--to=thomas.petazzoni@free-electrons.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox