From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Sun, 3 Mar 2013 20:52:42 +0100 Subject: [Buildroot] [PATCH] u-boot: u-boot SPL is usually under ./spl/ In-Reply-To: References: <1362329351-7738-1-git-send-email-carlo.caione@gmail.com> <20130303192824.2a2faf5d@skate> Message-ID: <20130303205242.423ad324@skate> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Dear Carlo Caione, On Sun, 3 Mar 2013 19:55:48 +0100, Carlo Caione wrote: > > In the case of OMAP, the SPL gets generated in the main source > > directory. For which configuration do you see that it is installed only > > in the spl/ sub-directory? > > I'm trying to use buildroot to create an image for a cubieboard > (http://cubieboard.org/). > In this case I have to use u-boot-sunxi and SPL gets generated only in spl/ Right, I tested this, and it gets installed in spl/. What about setting BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl.bin" ? Best regards, Thomas -- Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com