From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Wed, 6 Mar 2013 21:54:14 +0100 Subject: [Buildroot] adding dhcpcd In-Reply-To: <1362602480.20183.169.camel@genx> References: <1362163072.19802.25.camel@genx.eng.msli.com> <5130F7CA.6090203@zacarias.com.ar> <1362500477.20183.74.camel@genx> <20130305194707.474ded42@skate> <1362592916.20183.152.camel@genx> <20130306195844.2f8c14b6@skate> <1362599417.20183.159.camel@genx> <069B5A25F9844945B625ADE7258AC94C061FF823@4rf-nz-orion.local.4rf.com> <20130306210831.4fbe8150@skate> <1362602480.20183.169.camel@genx> Message-ID: <20130306215414.23271383@skate> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Dear John Stile, On Wed, 06 Mar 2013 12:41:20 -0800, John Stile wrote: > Yes, the place holder is bad, so I took it out. > I ran: make dhcpcd-dirclean > > My buildroot-2011.11/.config holds > BR2_PACKAGE_DHCPCD=y > BR2_INET_IPV6=y > BR2_TOOLCHAIN_BUILDROOT_INET_IPV6=y > > I cleaned up using: > rm -rf \ > ./dl/dhcpcd-3.2.3.tar.bz2 \ > ./output/build/dhcpcd-3.2.3 \ > ./output/build/buildroot-config/br2/package/dhcpcd.h \ > ./output/target/etc/init.d/dhcpcd.sh \ > ./output/target/usr/bin/dhcpcd > > But make still does not do anything for dhcpcd. If you have dl/dhcpcd-3.2.3.tar.bz2 in your dl/ directory, then it means that the package build process was started. Can you do: make dhcpcd-dirclean make 2>&1 | tee logfile Put the contents of logfile on http://code.bulix.org, and post the URL? Thanks, Thomas -- Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com