From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH] openobex: new package
Date: Sat, 9 Mar 2013 19:30:47 +0100 [thread overview]
Message-ID: <20130309193047.09e1730f@skate> (raw)
In-Reply-To: <1355094387-22886-2-git-send-email-s.martin49@gmail.com>
Dear Samuel Martin,
On Mon, 10 Dec 2012 00:06:22 +0100, Samuel Martin wrote:
> diff --git a/package/openobex/Config.in b/package/openobex/Config.in
> new file mode 100644
> index 0000000..06f4c7d
> --- /dev/null
> +++ b/package/openobex/Config.in
> @@ -0,0 +1,28 @@
> +config BR2_PACKAGE_OPENOBEX
> + bool "openobex"
Did you test if OpenOBEX really builds with a minimal uClibc toolchain?
If you want to save the build time, you can find a pre-compiled minimal
uClibc toolchain at
http://autobuild.buildroot.org/toolchains/tarballs/br-arm-basic-2012.11.1-1.tar.bz2.
> +if BR2_PACKAGE_OPENOBEX
> +config BR2_PACKAGE_OPENOBEX_BLUEZ
> + bool "enable bluez support"
> + select BR2_PACKAGE_BLUEZ_UTILS
Missing dependencies from bluez_utils.
Also ussp-push depends on OpenOBEX and bluez_utils. Maybe it depends on
bluez support to be enabled in OpenOBEX as well?
> +config BR2_PACKAGE_OPENOBEX_LIBUSB
> + bool "enable libusb support"
> + select BR2_PACKAGE_LIBUSB
Missing dependency from libusb (threads).
> +config BR2_PACKAGE_OPENOBEX_APPS
> + bool "install test applications"
> + help
> + Also install the openobex test applications on target.
> +
> +config BR2_PACKAGE_OPENOBEX_SYSLOG
> + bool "enable debugging to the system logger"
> +
> +config BR2_PACKAGE_OPENOBEX_DUMP
> + bool "enable protocol dumping for debugging"
> +endif
One empty line before endif (nitpicking).
> diff --git a/package/openobex/openobex-libusb_check_when_cross-compiling.patch b/package/openobex/openobex-libusb_check_when_cross-compiling.patch
> new file mode 100644
> index 0000000..7b8056a
> --- /dev/null
> +++ b/package/openobex/openobex-libusb_check_when_cross-compiling.patch
> @@ -0,0 +1,18 @@
> +Fix libusb check when cross-compiling.
> +
> +Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
> +Signed-off-by: Samuel Martin <s.martin49@gmail.com>
> +
> +Index: openobex-1.5/acinclude.m4
> +===================================================================
> +--- openobex-1.5.orig/acinclude.m4 2010-06-16 10:32:47.000000000 +0200
> ++++ openobex-1.5/acinclude.m4 2010-06-16 10:35:33.000000000 +0200
> +@@ -158,7 +158,7 @@
> + ;;
> + *)
> + PKG_CHECK_MODULES(USB, libusb, usb_lib_found=yes, AC_MSG_RESULT(no))
> +- AC_CHECK_FILE(${prefix}/lib/pkgconfig/libusb.pc, REQUIRES="libusb")
> ++ REQUIRES="libusb"
> + ;;
> + esac
> + AC_SUBST(USB_CFLAGS)
> diff --git a/package/openobex/openobex-replace_deprecated_functions.patch b/package/openobex/openobex-replace_deprecated_functions.patch
> new file mode 100644
> index 0000000..17274d3
> --- /dev/null
> +++ b/package/openobex/openobex-replace_deprecated_functions.patch
> @@ -0,0 +1,30 @@
> +obex_test_cable.c: avoid to use SuSv3 LEGACY APIs
> +
> +Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
> +Signed-off-by: Samuel Martin <s.martin49@gmail.com>
> +
> +Index: openobex-1.5/apps/obex_test_cable.c
> +===================================================================
> +--- openobex-1.5.orig/apps/obex_test_cable.c 2009-02-08 19:30:22.000000000 +0100
> ++++ openobex-1.5/apps/obex_test_cable.c 2010-06-16 11:11:05.000000000 +0200
> +@@ -113,9 +113,9 @@
> + if(total == sizeof(tmpbuf))
> + return -1;
> +
> +- if( (answer = index(tmpbuf, '\n')) ) {
> ++ if( (answer = strchr(tmpbuf, '\n')) ) {
> + // Remove first line (echo)
> +- if( (answer_end = index(answer+1, '\n')) ) {
> ++ if( (answer_end = strchr(answer+1, '\n')) ) {
> + // Found end of answer
> + done = 1;
> + }
> +@@ -178,7 +178,7 @@
> + }
> +
> + tcgetattr(gt->ttyfd, >->oldtio);
> +- bzero(>->newtio, sizeof(struct termios));
> ++ memset(>->newtio, 0, sizeof(struct termios));
> + gt->newtio.c_cflag = B115200 | CS8 | CREAD | CRTSCTS;
> + gt->newtio.c_iflag = IGNPAR;
> + gt->newtio.c_oflag = 0;
As usual, sending patches upstream would be good.
> diff --git a/package/openobex/openobex.mk b/package/openobex/openobex.mk
> new file mode 100644
> index 0000000..beac5ff
> --- /dev/null
> +++ b/package/openobex/openobex.mk
> @@ -0,0 +1,35 @@
> +#############################################################
> +#
> +# openobex
> +#
> +#############################################################
> +OPENOBEX_VERSION = 1.5
One empty line between header and first variable.
> +OPENOBEX_SITE = http://ftp.osuosl.org/pub/linux/bluetooth
> +# Libraries seems release under LGPLv2.1, while other material are undrer GPLv2
English fixes:
# Libraries seem to be released under LGPLv2.1, while other material is
# under GPLv2
> +OPENOBEX_LICENSE = GPLv2/LGPLv2.1
License is apparently GPLv2+ and LGPLv2.1+.
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
next prev parent reply other threads:[~2013-03-09 18:30 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-09 23:06 [Buildroot] [pull request] Pull request for branch for-2013.02/armadeus/new-pkgs Samuel Martin
2012-12-09 23:06 ` [Buildroot] [PATCH] openobex: new package Samuel Martin
2012-12-25 17:07 ` Eric Jarrige
2013-01-22 23:01 ` Samuel Martin
2013-03-09 17:26 ` Samuel Martin
2013-03-09 18:30 ` Thomas Petazzoni [this message]
2012-12-09 23:06 ` [Buildroot] [PATCH] ussp-push: " Samuel Martin
2012-12-25 17:08 ` Eric Jarrige
2013-01-22 23:01 ` Samuel Martin
2013-03-09 17:26 ` Samuel Martin
2013-03-09 18:25 ` Thomas Petazzoni
2012-12-09 23:06 ` [Buildroot] [PATCH] urg: " Samuel Martin
2012-12-09 23:06 ` [Buildroot] [PATCH] flite: " Samuel Martin
2012-12-25 13:50 ` Eric Jarrige
2013-01-22 23:01 ` Samuel Martin
2013-03-09 17:25 ` Samuel Martin
2012-12-09 23:06 ` [Buildroot] [PATCH] qwt: " Samuel Martin
2012-12-16 10:08 ` Peter Korsgaard
2012-12-17 6:55 ` Arnout Vandecappelle
2012-12-09 23:06 ` [Buildroot] [PATCH] libcanfestival: " Samuel Martin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130309193047.09e1730f@skate \
--to=thomas.petazzoni@free-electrons.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox