From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Sun, 24 Mar 2013 10:49:04 +0100 Subject: [Buildroot] X.org bump to 7.7 Message-ID: <20130324104904.2e980f14@skate> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hello Peter, I think you can pull the x11r77_v2 branch from https://bitbucket.org/baekdahl/buildroot. Notice that this is a slightly more recent version than the one posted on the list, so you shouldn't use patchwork to apply it. Considering the number of patches, I think pulling Jesper's branch is the easiest solution. I've build-tested this branch in two situations: * ARM Buildroot toolchain, as minimal as possible: only WCHAR enabled, which is the only mandatory requirement for X.org. Did a Kdrive build of X.org, after enabling a bunch of random X applications. * PowerPC glibc external toolchain. Did a Modular X.org build, after enabling a bunch of random X.org drivers and X.org applications. Both builds went fine, so I think we should pull this X.org bump. Thanks, Thomas -- Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com