From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Wed, 10 Apr 2013 21:12:20 +0200 Subject: [Buildroot] Buildroot on Toradex Colibri PXA300 In-Reply-To: <4E1AF0DD-1622-4CD1-9C61-6A8C7BE71151@gmail.com> References: <4E1AF0DD-1622-4CD1-9C61-6A8C7BE71151@gmail.com> Message-ID: <20130410211220.38fef23a@skate> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Dear Marcus Tangermann, On Wed, 10 Apr 2013 20:09:34 +0200, Marcus Tangermann wrote: > I try to build a system for a Colibri Board with the Iris carrier > board from Toradex. Its a Marvell PXA300 with 64MB RAM and NAND > flash. I've configured a generic ARM for the toolchain and selected > the colibri_pxa300_defconfig for the kernel which is already part of > the Vanilla kernel. When booting the kernel stops after uboot > unpacked the kernel. > > Has someone used this board before or has any hint? Enable CONFIG_DEBUG_LL, CONFIG_EARLYPRINTK and pass 'earlyprintk' on your kernel command line. That should enable some more low-level debugging messages. I have personally never used PXA300 platforms, so I don't really know at this point, but if we get more messages, it may provide some more hints. Best regards, Thomas -- Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com