From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Wed, 17 Apr 2013 17:36:56 +0200 Subject: [Buildroot] I: Configure buildroot for xen In-Reply-To: <1366212821.63063.YahooMailClassic@web171902.mail.ir2.yahoo.com> References: <20130417110236.054b83b0@skate> <1366212821.63063.YahooMailClassic@web171902.mail.ir2.yahoo.com> Message-ID: <20130417173656.712a8926@skate> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Dear Luisa Posani, On Wed, 17 Apr 2013 16:33:41 +0100 (BST), Luisa Posani wrote: > After so much suffering I was able to start the virtual machine by mounting the disk xvda1. > I have a problem, however, when in the inittab file is set to respawn the getty. > > You do not see more traces. > > What kind of console I have to give? Probably some Xen specific console, I don't know which device it is. Once you figure it out, set the BR2_TARGET_GENERIC_GETTY_PORT option to it. Also, it would be good if you could at the end share your configuration file as well as the procedure you've used to test it under Xen. It may be useful for other persons. Best regards, Thomas -- Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com