From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Wed, 29 May 2013 17:17:11 +0200 Subject: [Buildroot] [PATCHv3 ] python3: Port python2 patches to reduce the interpreter size In-Reply-To: References: <1369816617-6315-1-git-send-email-maxime.ripard@free-electrons.com> Message-ID: <20130529171711.412e5b4c@skate> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Dear Samuel Martin, On Wed, 29 May 2013 16:56:47 +0200, Samuel Martin wrote: > I've run few builds (same config, with all or no modules selected, > with/without this patch applied): > -rw-r--r-- 1 sam sam 64M May 29 12:39 > br-output/python-without-patch/images/rootfs.tar > -rw-r--r-- 1 sam sam 29M May 29 12:50 > br-output/python-with-patch-v3-no-modules/images/rootfs.tar > -rw-r--r-- 1 sam sam 32M May 29 12:49 > br-output/python-with-patch-v3-all-modules/images/rootfs.tar I would have expected this 32M to be much closer to the 64M. Normally, with all modules enabled, we should have the same size as the Python interpreter without Maxime's patch. Or am I missing something? Thomas -- Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com