From mboxrd@z Thu Jan 1 00:00:00 1970 From: Baruch Siach Date: Wed, 1 Jan 2014 18:20:40 +0200 Subject: [Buildroot] Configuring the gpsd package In-Reply-To: <858B5C1843112849BC285F6BF91A22640EB1B569@VF2WDEXMB1.verifone.com> References: <858B5C1843112849BC285F6BF91A22640EB1B569@VF2WDEXMB1.verifone.com> Message-ID: <20140101162040.GJ4470@tarshish> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hi Gabi, On Wed, Jan 01, 2014 at 03:31:55PM +0000, Gabi Kelemen wrote: > As I see in the gpsd_config.h file which is generated by scons, there are > several definitions that, as I understand, can be configured during build. > Can anyone tell me how to use the config.in file for that, or any other way > that I can do that? > > For example: I want to enable only NMEA protocol and disable PPS and ntp_shm. Do 'make menuconfig' and go to 'Target packages' -> 'Hardware handling' -> 'gpsd' -> 'Features' and 'Protocols'. The options you mention are called 'NMEA' (under 'Protocols'), 'PPS time syncing support', and 'NTP time hinting support' (both under 'Features'). Just enable or disable them as needed. I hope this helps. baruch -- http://baruch.siach.name/blog/ ~. .~ Tk Open Systems =}------------------------------------------------ooO--U--Ooo------------{= - baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -