[Buildroot] Configuring the gpsd package

[Baruch Siach <baruch@tkos.co.il>]

Hi Gabi,

On Thu, Jan 02, 2014 at 08:21:16AM +0000, Gabi Kelemen wrote:
> I don't see the gpsd checker box at all.

Then you have much bigger problem than protocol selection. Have you added the 
needed 'source' directive in package/Config.in?

> I'm using buildroot version 2010.11.

This is quite old. A lot has changes since then. The level of support you can 
expect from Buildroot developers will increase significantly if you update to 
something more recent.

> BTW, does my problem can have anything to do with the SCONS package needed 
> to build the gpsd?

Probably not. But you are likely to encounter a build failure once you fix you 
Config.in problem. Installing scons on your host might be enough, though.

baruch

> -----Original Message-----
> From: Baruch Siach [mailto:baruch at tkos.co.il]
> Sent: Thursday, January 02, 2014 10:02 AM
> To: Gabi Kelemen
> Cc: buildroot at busybox.net
> Subject: Re: [Buildroot] Configuring the gpsd package
> 
> Hi Gabi,
> 
> On Thu, Jan 02, 2014 at 07:53:27AM +0000, Gabi Kelemen wrote:
> > I'm not using the most current version of buildroot, I just took the
> > gpsd package from a new version and want to use it with an old version.
> > Therefore I cannot do the changes you suggest, because I don't see the gpsd option.
> > Can you think of any other suggestions?
> 
> What is it exactly that you don't see? Do you see the "gpsd" checker box at all? The basic config syntax has not changed much in recent years, so you should see these options.
> 
> What Buildroot version are you using?
> 
> baruch
> 
> > -----Original Message-----
> > From: Baruch Siach [mailto:baruch at tkos.co.il]
> > Sent: Wednesday, January 01, 2014 6:21 PM
> > To: Gabi Kelemen
> > Cc: buildroot at busybox.net
> > Subject: Re: [Buildroot] Configuring the gpsd package
> >
> > Hi Gabi,
> >
> > On Wed, Jan 01, 2014 at 03:31:55PM +0000, Gabi Kelemen wrote:
> > > As I see in the gpsd_config.h file which is generated by scons,
> > > there are several definitions that, as I understand, can be configured during build.
> > > Can anyone tell me how to use the config.in file for that, or any
> > > other way that I can do that?
> > >
> > > For example: I want to enable only NMEA protocol and disable PPS and ntp_shm.
> >
> > Do 'make menuconfig' and go to 'Target packages' -> 'Hardware
> > handling' -> 'gpsd' -> 'Features' and 'Protocols'. The options you
> > mention are called 'NMEA' (under 'Protocols'), 'PPS time syncing
> > support', and 'NTP time hinting support' (both under 'Features'). Just
> > enable or disable them as needed.
> >
> > I hope this helps.
> >
> > baruch

-- 
     http://baruch.siach.name/blog/                  ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -