From mboxrd@z Thu Jan 1 00:00:00 1970 From: Baruch Siach Date: Thu, 2 Jan 2014 13:06:39 +0200 Subject: [Buildroot] Wrong compiler path when compiling zlib In-Reply-To: References: <20140102044704.GF6589@tarshish> <20140102091925.GO6589@tarshish> <20140102103439.GW6589@tarshish> Message-ID: <20140102110639.GY6589@tarshish> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hi Ivan, On Thu, Jan 02, 2014 at 11:37:58AM +0100, Ivan Wagner wrote: > yes you're right it's quite unusual in fact I changed it to little > endian but I still see the same toolchain paths that aren't pointing > to the custom pre-installed I've selected. Check what these symlinks under output/host/usr/bin/ point to. baruch > On Thu, Jan 2, 2014 at 11:34 AM, Baruch Siach wrote: > > HI Ivan, > > > > On Thu, Jan 02, 2014 at 11:08:16AM +0100, Ivan Wagner wrote: > >> On Thu, Jan 2, 2014 at 10:19 AM, Baruch Siach wrote: > >> > Do you see the same error? Something else? Can you post your .config? > >> > >> Yes the error is exactly the same. Here's the .config file: > > > > [...] > > > >> BR2_ARCH="armeb" > >> BR2_ENDIAN="BIG" > > > > Big endian ARM? This is quite unusual. > > > > [...] > > > >> BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://arago-project.org/git/projects/linux-am33x.git" > > > > I don't think that AM33x SoCs are big endian. What happens if you change to > > little endian ARM? > > > > baruch -- http://baruch.siach.name/blog/ ~. .~ Tk Open Systems =}------------------------------------------------ooO--U--Ooo------------{= - baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -