From: Baruch Siach <baruch@tkos.co.il>
To: buildroot@busybox.net
Subject: [Buildroot] [RFC, PATCH 4/8] package/powerpc-utils: Add powerpc hardware utilities
Date: Thu, 16 Jan 2014 11:30:38 +0200 [thread overview]
Message-ID: <20140116093038.GB4602@tarshish> (raw)
In-Reply-To: <1389862338.918857.878477328980.4.gpush@pablo>
Hi Jeremy,
On Thu, Jan 16, 2014 at 04:52:18PM +0800, Jeremy Kerr wrote:
> This change adds a package definition for the powerpc-utils project,
> containing a set of powerpc-specific hardware management utilities.
>
> We're using a git tag from upstream, which contains a few build-system
> fixes. We also add a patch to use `reboot` instead of `shutdown -r`,
> allowing compatibility with busybox.
>
> Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
[...]
> diff --git a/package/powerpc-utils/powerpc-utils.mk
> b/package/powerpc-utils/powerpc-utils.mk
> new file mode 100644
> index 00000000..15deb2e9
> --- /dev/null
> +++ b/package/powerpc-utils/powerpc-utils.mk
> @@ -0,0 +1,14 @@
> +#############################################################
> +#
> +# powerpc-utils
> +#
> +#############################################################
> +
> +POWERPC_UTILS_VERSION = aeb32757
Please use the full 40-char commit id.
> +POWERPC_UTILS_SITE = git://git.code.sf.net/p/powerpc-utils/powerpc-utils
> +POWERPC_UTILS_AUTORECONF = YES
> +POWERPC_UTILS_DEPENDENCIES = zlib
> +
> +POWERPC_UTILS_CONF_OPT += --without-librtas
> +
> +$(eval $(autotools-package))
baruch
--
http://baruch.siach.name/blog/ ~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -
next prev parent reply other threads:[~2014-01-16 9:30 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-16 8:52 [Buildroot] [RFC, PATCH 0/8] Enable a buildroot-based petitboot bootloader Jeremy Kerr
2014-01-16 8:52 ` [Buildroot] [RFC, PATCH 4/8] package/powerpc-utils: Add powerpc hardware utilities Jeremy Kerr
2014-01-16 9:30 ` Baruch Siach [this message]
2014-01-16 13:11 ` Jerzy Grzegorek
2014-01-29 8:12 ` Thomas Petazzoni
2014-01-30 1:51 ` Jeremy Kerr
2014-01-16 8:52 ` [Buildroot] [RFC, PATCH 5/8] package/kexec-lite: Add a package for the kexec-lite tools Jeremy Kerr
2014-01-16 9:36 ` Baruch Siach
2014-01-17 1:51 ` Jeremy Kerr
2014-01-16 13:17 ` Jerzy Grzegorek
2014-01-30 19:46 ` Thomas Petazzoni
2014-02-03 5:37 ` Jeremy Kerr
2014-02-03 7:04 ` Thomas Petazzoni
2014-02-28 7:11 ` Jeremy Kerr
2014-02-28 7:37 ` Thomas Petazzoni
2014-01-30 19:47 ` Thomas Petazzoni
2014-01-16 8:52 ` [Buildroot] [RFC, PATCH 6/8] package/petitboot: Add petitboot, the userspace bootloader Jeremy Kerr
2014-01-30 20:51 ` Thomas Petazzoni
2014-02-28 5:39 ` Jeremy Kerr
2014-01-16 8:52 ` [Buildroot] [RFC,PATCH 8/8] Add powerpc petitboot defconfig Jeremy Kerr
2014-01-16 8:52 ` [Buildroot] [RFC, PATCH 2/8] package/dropbear: Add separate configuration options for client and server Jeremy Kerr
2014-03-03 23:46 ` Yann E. MORIN
2014-03-03 23:54 ` Jeremy Kerr
2014-03-04 0:14 ` Gustavo Zacarias
2014-03-04 1:07 ` Jeremy Kerr
2014-03-04 1:44 ` Gustavo Zacarias
2014-03-04 1:51 ` Jeremy Kerr
2014-03-04 18:36 ` Yann E. MORIN
2014-01-16 8:52 ` [Buildroot] [RFC, PATCH 7/8] package/iprutils: Add IBM Power RAID utilities Jeremy Kerr
2014-01-16 13:24 ` Jerzy Grzegorek
2014-01-17 1:58 ` Jeremy Kerr
2014-01-30 20:54 ` Thomas Petazzoni
2014-01-16 8:52 ` [Buildroot] [RFC, PATCH 1/8] package/busybox: Add facility for DHCP hooks Jeremy Kerr
2014-03-04 20:01 ` Yann E. MORIN
2014-01-16 8:52 ` [Buildroot] [RFC, PATCH 3/8] package/ncurses: Allow building wide char support Jeremy Kerr
2014-01-30 19:44 ` Thomas Petazzoni
2014-02-28 2:53 ` Jeremy Kerr
2014-01-17 2:16 ` [Buildroot] [RFC, PATCH 0/8] Enable a buildroot-based petitboot bootloader Jeremy Kerr
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140116093038.GB4602@tarshish \
--to=baruch@tkos.co.il \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox