From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Mon, 27 Jan 2014 07:34:22 +0100 Subject: [Buildroot] full rebuild and errors: In-Reply-To: <52E4FA86.7030906@gmail.com> References: <52E4FA86.7030906@gmail.com> Message-ID: <20140127073422.6cdba910@skate> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Dear Marco Trapanese, On Sun, 26 Jan 2014 13:07:34 +0100, Marco Trapanese wrote: > I successfully compiled buildroot for Raspberry Pi following this guide: > > https://github.com/albertd/buildroot-rpi > > I had a problem with some applications (btw it was: EGL Error : Could > not create the egl surface: error = 0x300b) and I read some users were > able to solve just rebuilding buildroot. The version of Buildroot you've used is a derivate of the official Buildroot version. So there is no way we can really help you on this. You should either use the official Buildroot version (and ask the people who forked Buildroot to contribute their changes back to the official version), or ask for support from the authors of the derivative version. If you can reproduce this problem with the official Buildroot, then we can certainly look into it and help fixing the issue. Best regards, Thomas -- Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com