From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Fri, 21 Feb 2014 23:59:22 +0100 Subject: [Buildroot] udev 182: scsi/scsi.h not found In-Reply-To: <5307C265.8020004@gmail.com> References: <5307AB0F.30602@gmail.com> <87fvncuqmu.fsf@dell.be.48ers.dk> <5307C265.8020004@gmail.com> Message-ID: <20140221235922.26b25b2f@skate> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Dear Marco Trapanese, On Fri, 21 Feb 2014 22:17:25 +0100, Marco Trapanese wrote: > Il 21/02/2014 22:01, Peter Korsgaard ha scritto: > > What toolchain / .config are you using? uClibc (default for the internal > > toolchain) provides scsi/scsi.h > > I'm using eglibc because I need the eglfs support. Currently I'm trying > to use the internal toolchain just to see if it builds successfully. > Likely the next shot will be the linaro toolchain (it's for a imx6 board). When you report a build error, you should always : 1) Ensure that the build error can be reproduced after a "make clean; make" cycle. 2) Provide your Buildroot .config file as well as the exact Buildroot version you're using. Thanks! Thomas -- Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com