From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Fri, 7 Mar 2014 23:46:43 +0100 Subject: [Buildroot] [PATCH] Initial support for i.mx6 sabreauto board In-Reply-To: References: Message-ID: <20140307234643.605da11f@skate> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Dear Abdul Hussain, On Fri, 8 Nov 2013 21:44:06 +0530, Abdul Hussain wrote: > Signed-off-by: Abdul Hussain > --- > configs/freescale_imx6sabreauto_defconfig | 9 +++++++++ > 1 file changed, 9 insertions(+) > create mode 100644 configs/freescale_imx6sabreauto_defconfig > > diff --git a/configs/freescale_imx6sabreauto_defconfig b/configs/freescale_imx6sabreauto_defconfig > new file mode 100644 > index 0000000..d02a395 > --- /dev/null > +++ b/configs/freescale_imx6sabreauto_defconfig > @@ -0,0 +1,9 @@ > +BR2_arm=y > +BR2_cortex_a9=y > +BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3" > +BR2_LINUX_KERNEL=y > +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y > +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/snapshot/linux-2.6-imx-imx_3.0.35_4.1.0.tar.bz2" > +BR2_LINUX_KERNEL_DEFCONFIG="imx6" > +BR2_TARGET_UBOOT=y > +BR2_TARGET_UBOOT_BOARDNAME="mx6qsabreauto" A specific U-Boot version should be used, see all the other defconfig files we have in Buildroot. Also, a specific kernel headers version should be specified, which matches the 3.0.x kernel being used here. Could you take these comments into account, and resubmit an updated version? Thanks! Thomas -- Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com