From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Sun, 11 May 2014 18:07:06 +0200 Subject: [Buildroot] Autobuilder news In-Reply-To: <536E8BEB.7020300@mind.be> References: <20140504223611.5a6177c1@skate> <536E8BEB.7020300@mind.be> Message-ID: <20140511180706.4a6f449e@free-electrons.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Dear Arnout Vandecappelle, On Sat, 10 May 2014 22:28:27 +0200, Arnout Vandecappelle wrote: > Is it possible that you installed new binaries with the same name but a > different ctng configuration? That's a bit annoying because it breaks > reproducibility... It's OK to remove the old toolchains, but it would be good if > the new ones would have a different name. No: the new toolchains have a different tarball names, and the old toolchain tarballs were all kept at their original location with their original name. So normally all the builds from the Free Electrons build server should be reproducible, including the ones using older Crosstool-NG toolchains. Have you noticed any specific problem? Thanks, Thomas -- Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com