From mboxrd@z Thu Jan 1 00:00:00 1970 From: Maxime Ripard Date: Mon, 19 May 2014 12:08:46 +0200 Subject: [Buildroot] Problems building for Olimex A13. A new user enquires ... In-Reply-To: <0ade01cf7348$1daadc10$59009430$@novadsp.com> References: <09d801cf72fa$f6cc2c40$e46484c0$@novadsp.com> <20140519025610.GE27238@tarshish> <0ade01cf7348$1daadc10$59009430$@novadsp.com> Message-ID: <20140519100846.GF29466@lukather> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hi, On Mon, May 19, 2014 at 10:52:58AM +0100, g4 at novadsp.com wrote: > Hello Baruch. > > Attached as A13.config. Modified to set up as follows: > > BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="sunxi" > BR2_TARGET_UBOOT_VERSION="sunxi" > > Even though I can pull and build u-boot on its own Buildroot still fails as > shown below. I realize this is bound to be user error so thanks again. > > inux-uclibcgnueabi-" ARCH=arm A13-Olimex_config You have to set BR2_TARGET_UBOOT_BOARDNAME to A13-OLinuXino. Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: