From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Sun, 21 Sep 2014 21:25:19 +0200 Subject: [Buildroot] [PATCH v4 0/4] Improvements to i.MX6 SABRESD boards support In-Reply-To: <1411135972-14968-1-git-send-email-luca@lucaceresoli.net> References: <1411135972-14968-1-git-send-email-luca@lucaceresoli.net> Message-ID: <20140921212519.296ade2a@free-electrons.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Dear Luca Ceresoli, On Fri, 19 Sep 2014 16:12:48 +0200, Luca Ceresoli wrote: > Luca Ceresoli (3): > configs/freescale_imx6qsabresd: rename imx6 to imx6q > configs/freescale_imx6dlsabresd: add defconfig for iMX6DL SabreSD > freescale/imx6-sabresd: document how to create a bootable SD > > Vincent Stehl? (1): > imx6sabresd: boot to /init in mfgtools mode I've applied your four patches. However, I'd like to see additional patches to make the following improvements: * For the defconfigs, select a specific version of the kernel headers. Currently, your defconfigs are building a 3.10 kernel, but the kernel headers used in the toolchain are the latest ones (i.e 3.16 currently), which is not good. This was already wrong in the existing defconfig, so I applied your patches nonetheless. But it should be fixed. * For the last patch adding a U-Boot patch, I believe we would prefer to use the global patch dir mechanism now, rather than the U-Boot specific option for patches. Thanks, Thomas -- Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com