Buildroot Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Yann E. MORIN <yann.morin.1998@free.fr>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH v3 1/8] package/mpd: bump to version 0.19
Date: Fri, 24 Oct 2014 16:33:49 -0700	[thread overview]
Message-ID: <20141024233349.GD14818@free.fr> (raw)
In-Reply-To: <544AADC6.3020400@posteo.de>

J?rg, All,

On 2014-10-24 21:51 +0200, J?rg Krause spake thusly:
> Hi all,
> 
> On 10/17/2014 12:28 AM, Jo:rg Krause wrote:
> 
>  * Bump to version 0.19
>  * Add boost as dependency* Add support for libicu
>  Signed-off-by: Jo:rg Krause
>  [1]<jkrause@posteo.de>---Changes v2 -> v3:
>    - noneChanges v1 -> v2:  - fix missing dependency of boost
>  --- package/mpd/Config.in |  4 +++- package/mpd/mpd.mk    | 14 +++++++++++---
>   2 files changed, 14 insertions(+), 4 deletions(-)
>  diff --git a/package/mpd/Config.in b/package/mpd/Config.in
>  index 8884464..f2dbbb0 100644--- a/package/mpd/Config.in
>  +++ b/package/mpd/Config.in@@ -1,12 +1,14 @@
>   menuconfig BR2_PACKAGE_MPD     bool "mpd"      depends on BR2_INSTALL_LIBSTDCPP
>  +       depends on BR2_LARGEFILE # boost        depends on BR2_USE_WCHAR # libglib2, flac
>          depends on BR2_TOOLCHAIN_HAS_THREADS # libglib2
>          depends on BR2_USE_MMU # libglib2       # avr32, sparc & CS powerpc gcc are too old
>          depends on !(BR2_avr32 || BR2_sparc)    depends on !(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201103 || BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009)
>  +       select BR2_PACKAGE_BOOST        select BR2_PACKAGE_LIBGLIB2
>          select BR2_PACKAGE_LIBICONV if !BR2_ENABLE_LOCALE
>          select BR2_PACKAGE_MPD_TREMOR if !(BR2_PACKAGE_MPD_MAD || BR2_PACKAGE_MPD_MPG123 || BR2_PACKAGE_MPD_VORBIS || BR2_PACKAGE_MPD_WAVPACK || BR2_PACKAGE_MPD_FLAC || BR2_PACKAGE_MPD_MUSEPACK || BR2_PACKAGE_MPD_FFMPEG)
>  @@ -211,4 +213,4 @@ comment "mpd needs a toolchain w/ C++, threads, wchar"
>          depends on BR2_USE_MMU  depends on !(BR2_avr32 || BR2_sparc)
>          depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR || \
>  -               !BR2_TOOLCHAIN_HAS_THREADS+             !BR2_TOOLCHAIN_HAS_THREADS || !BR2_LARGEFILE
>  diff --git a/package/mpd/mpd.mk b/package/mpd/mpd.mk
>  index 932df08..1542338 100644--- a/package/mpd/mpd.mk
>  +++ b/package/mpd/mpd.mk@@ -4,11 +4,11 @@
>   # ################################################################################
>   -MPD_VERSION_MAJOR = 0.18-MPD_VERSION = $(MPD_VERSION_MAJOR).16
>  +MPD_VERSION_MAJOR = 0.19+MPD_VERSION = $(MPD_VERSION_MAJOR)
>   MPD_SOURCE = mpd-$(MPD_VERSION).tar.xz MPD_SITE =
>  [2]http://www.musicpd.org/download/mpd/$(MPD_VERSION_MAJOR)
>  -MPD_DEPENDENCIES = host-pkgconf libglib2
>  +MPD_DEPENDENCIES = host-pkgconf boost libglib2
>   MPD_LICENSE = GPLv2+ MPD_LICENSE_FILES = COPYING
>   @@ -19,6 +19,14 @@ else MPD_CONF_OPTS += --with-zeroconf=no
>   endif +# MPD prefers libicu for utf8 collation instead of libglib2.
>  +ifeq ($(BR2_PACKAGE_ICU),y)+MPD_DEPENDENCIES += icu
>  +MPD_CONF_OPTS += --enable-icu+else+MPD_CONF_OPTS += --disable-icu
>  +endif+ ifeq ($(BR2_PACKAGE_MPD_ALSA),y) MPD_DEPENDENCIES += alsa-lib
>   MPD_CONF_OPTS += --enable-alsa
> 
> sorry for being impatient. Is there anything to take into consideration for this series of patches?

Someone has to review those patches.

We have limited time available to review the many patches that are being
sent, so it can take a bit of time for patches to be applied.

Just look at the pending list of patches:
    http://patchwork.ozlabs.org/project/buildroot/list/

You can help reduce this list by reviewing (and testing) pending
patches, see:
    http://buildroot.net/downloads/manual/manual.html#_reviewing_and_testing_patches

Regards,
Yann E. MORIN.

-- 
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'

  reply	other threads:[~2014-10-24 23:33 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-16 22:28 [Buildroot] [PATCH v3 1/8] package/mpd: bump to version 0.19 Jörg Krause
2014-10-16 22:28 ` [Buildroot] [PATCH v3 2/8] package/mpd: sort plugins by type in Config.in Jörg Krause
2014-10-16 22:28 ` [Buildroot] [PATCH v3 3/8] package/mpd: sort plugins alphabetically in mpd.mk Jörg Krause
2014-10-16 22:28 ` [Buildroot] [PATCH v3 4/8] package/mpd: enable support for libsoxr Jörg Krause
2014-10-16 22:29 ` [Buildroot] [PATCH v3 5/8] package/mpd: enable support for libsmbclient Jörg Krause
2014-10-16 22:29 ` [Buildroot] [PATCH v3 6/8] package/mpd: enable support for libnfs Jörg Krause
2014-10-16 22:29 ` [Buildroot] [PATCH v3 7/8] package/mpd: enable support for dsd Jörg Krause
2014-10-16 22:29 ` [Buildroot] [PATCH v3 8/8] package/mpd: fix zeroconf support Jörg Krause
2014-10-24 19:51 ` [Buildroot] [PATCH v3 1/8] package/mpd: bump to version 0.19 Jörg Krause
2014-10-24 23:33   ` Yann E. MORIN [this message]
2014-10-27 22:10 ` Thomas Petazzoni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20141024233349.GD14818@free.fr \
    --to=yann.morin.1998@free.fr \
    --cc=buildroot@busybox.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox