Buildroot Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Yann E. MORIN <yann.morin.1998@free.fr>
To: buildroot@busybox.net
Subject: [Buildroot] [autobuild.buildroot.net] Build results for 2015-02-07
Date: Sun, 8 Feb 2015 16:38:37 +0100	[thread overview]
Message-ID: <20150208153837.GG4028@free.fr> (raw)
In-Reply-To: <54D77FF2.6010705@imgtec.com>

Vincet, All,

On 2015-02-08 16:25 +0100, Vicente Olivert Riera spake thusly:
> just in case..., could it be caused because those "not-found" files are
> generated during build time and they are required before being
> generated? (race-condition issue). Have you tried using -j1?

No, those files are provided by rpi-userland; they are not generated by
Webkit. So they are present in the staging at the time Webkit is being
configured.

And -j1 would not help, since we're still in Wenbkit's ./configure, so
we're already sequential anyway.

Thanks for the suggestion, though! :-)

Regards,
Yann E. MORIN.

> Regards,
> --
> Vincent
> 
> On 08/02/15 16:17, Yann E. MORIN wrote:
> > All,
> > 
> > On 2015-02-08 08:30 +0100, Thomas Petazzoni spake thusly:
> >> Detail of failures
> >>          arm |                  webkit-1.11.5 | NOK | http://autobuild.buildroot.net/results/d5d652a143ecf7c15197364739094a480142125b/
> > 
> > I had a look at that one. That's strange...
> > 
> > checking EGL/egl.h usability... no
> > checking EGL/egl.h presence... no
> > checking for EGL/egl.h... no
> > checking whether to enable EGL support... no
> > checking GLES2/gl2.h usability... yes
> > checking GLES2/gl2.h presence... yes
> > checking for GLES2/gl2.h... yes
> > checking whether to use OpenGL ES 2 support... configure: error: Cannot
> > enable OpenGL ES 2 support without EGL
> > 
> > So I tried reproducing it here, and it fails all the same. SO I had a
> > look at config.log, and saw this:
> > 
> >     configure:20368: /home/ymorin/dev/buildroot/O/host/usr/bin/arm-linux-gcc
> >     -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os
> >     -Wno-cast-align -Wno-sign-compare -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE
> >     -D_FILE_OFFSET_BITS=64 conftest.c >&5
> >     In file included from /home/ymorin/dev/buildroot/O/host/usr/arm-buildroot-linux-gnueabihf/sysroot/usr/include/interface/vcos/vcos_assert.h:149:0,
> >                      from /home/ymorin/dev/buildroot/O/host/usr/arm-buildroot-linux-gnueabihf/sysroot/usr/include/interface/vcos/vcos.h:114,
> >                      from /home/ymorin/dev/buildroot/O/host/usr/arm-buildroot-linux-gnueabihf/sysroot/usr/include/interface/vmcs_host/vc_dispmanx.h:33,
> >                      from /home/ymorin/dev/buildroot/O/host/usr/arm-buildroot-linux-gnueabihf/sysroot/usr/include/EGL/eglplatform.h:110,
> >                      from /home/ymorin/dev/buildroot/O/host/usr/arm-buildroot-linux-gnueabihf/sysroot/usr/include/EGL/egl.h:36,
> >                      from conftest.c:64:
> >     /home/ymorin/dev/buildroot/O/host/usr/arm-buildroot-linux-gnueabihf/sysroot/usr/include/interface/vcos/vcos_types.h:38:33:
> >     fatal error: vcos_platform_types.h: No such file or directory
> >      #include "vcos_platform_types.h"
> >                                      ^
> >     compilation terminated.
> > 
> > So, whats weird is that vcos_platform_types.h is in:
> >     staging/usr/include/interface/vcos/pthreads/vcos_platform_types.h
> > 
> > which we correctly set in egl.pc:
> > 
> >     prefix=/usr
> >     exec_prefix=${prefix}
> >     libdir=${exec_prefix}/lib
> >     includedir=${prefix}/include
> > 
> >     Name: egl
> >     Description: RasberryPi implementation of EGL
> >     Version: 10
> >     Libs: -L${libdir} -lEGL -lGLESv2 -lbcm_host -lvchostif
> >     Cflags: -I${includedir}/ -I${includedir}/interface/vcos/pthreads/ \
> >             -I${includedir}/interface/vmcs_host/linux/
> > 
> > But then, if one looks at the command line, the -I path to vcos_platform_types.h
> > is not present, so it is not a wonder that it does not find it.
> > 
> > However, there is no specific -I paths at all either, so it is in turn a
> > wonder it finds the other vcos headers:
> >     sysroot/usr/include/interface/vmcs_host/vc_dispmanx.h
> >     sysroot/usr/include/interface/vcos/vcos.h
> >     sysroot/usr/include/interface/vcos/vcos_assert.h
> > 
> > And even for the EGL headers:
> >     sysroot/usr/include/EGL/egl.h
> >     sysroot/usr/include/EGL/eglplatform.h
> > 
> > So, I'm not sure what happens here... :-(
> > 
> > Investigation in progress...
> > 
> > Regards,
> > Yann E. MORIN.
> > 
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot

-- 
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'

  reply	other threads:[~2015-02-08 15:38 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-08  7:30 [Buildroot] [autobuild.buildroot.net] Build results for 2015-02-07 Thomas Petazzoni
2015-02-08 15:17 ` Yann E. MORIN
2015-02-08 15:25   ` Vicente Olivert Riera
2015-02-08 15:38     ` Yann E. MORIN [this message]
2015-02-08 16:05   ` Bernd Kuhls
2015-02-08 16:16     ` Yann E. MORIN

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150208153837.GG4028@free.fr \
    --to=yann.morin.1998@free.fr \
    --cc=buildroot@busybox.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox