From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Thu, 5 Mar 2015 12:30:54 +0100 Subject: [Buildroot] [PATCH 1/1] configs: update config for Atmel SAMA5D3 Xplained board In-Reply-To: <1425526590-5961-1-git-send-email-ryanbarnett3@gmail.com> References: <1425526590-5961-1-git-send-email-ryanbarnett3@gmail.com> Message-ID: <20150305123054.3e454df6@free-electrons.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Dear Ryan Barnett, On Wed, 4 Mar 2015 21:36:30 -0600, Ryan Barnett wrote: > Update configuration to use the 3.18.8 kernel and update U-Boot to > 2015.01. With the switch to 2015.01. use the U-Boot SPL image for the > first stage bootloader instead of the at91bootstrap. The U-Boot SPL > requires that the U-Boot image format be u-boot.img in order to load > from the SD card. > > Signed-off-by: Ryan Barnett > --- > board/atmel/xplained/readme.txt | 4 ++-- > configs/atmel_xplained_defconfig | 16 +++++++--------- > 2 files changed, 9 insertions(+), 11 deletions(-) I've tested this on HW, and applied, thanks! Now that there is a sama5d4 Xplained board, maybe we should rename this defconfig, and the board directory to sama5d3-xplained or something like that. Thomas -- Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com