From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alexandre Belloni Date: Thu, 5 Mar 2015 13:43:23 +0100 Subject: [Buildroot] [PATCH 1/1] configs: update config for Atmel SAMA5D3 Xplained board In-Reply-To: <20150305123054.3e454df6@free-electrons.com> References: <1425526590-5961-1-git-send-email-ryanbarnett3@gmail.com> <20150305123054.3e454df6@free-electrons.com> Message-ID: <20150305124323.GR3989@piout.net> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On 05/03/2015 at 12:30:54 +0100, Thomas Petazzoni wrote : > Dear Ryan Barnett, > > On Wed, 4 Mar 2015 21:36:30 -0600, Ryan Barnett wrote: > > Update configuration to use the 3.18.8 kernel and update U-Boot to > > 2015.01. With the switch to 2015.01. use the U-Boot SPL image for the > > first stage bootloader instead of the at91bootstrap. The U-Boot SPL > > requires that the U-Boot image format be u-boot.img in order to load > > from the SD card. > > > > Signed-off-by: Ryan Barnett > > --- > > board/atmel/xplained/readme.txt | 4 ++-- > > configs/atmel_xplained_defconfig | 16 +++++++--------- > > 2 files changed, 9 insertions(+), 11 deletions(-) > > I've tested this on HW, and applied, thanks! > > Now that there is a sama5d4 Xplained board, maybe we should rename this The sama5d4 Xplained real name is actually sama5d4 Xplained Ultra. That would probably be different enough, unless Linux starts running on the MCUs. -- Alexandre Belloni, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com