From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Fri, 1 May 2015 10:25:58 +0200 Subject: [Buildroot] [PATCH 1/2] raspberrypi2: switch Linux kernel to rpi-3.18.y In-Reply-To: <1430314604-28680-1-git-send-email-fhunleth@troodon-software.com> References: <1430314604-28680-1-git-send-email-fhunleth@troodon-software.com> Message-ID: <20150501102558.338835cc@free-electrons.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Dear Frank Hunleth, On Wed, 29 Apr 2015 09:36:43 -0400, Frank Hunleth wrote: > This changes the kernel used on the Raspberry Pi 2 from the 3.19 branch > back to the 3.18 branch. This provides a couple of advantages: > > 1. mmc0 works again. Floris Bos found out that this was due to using > the precompiled DTB files from rpi-firmware. These DTBs were built > using 3.18. > 2. The rpi-3.18.y branch is not regularly rebased like rpi-3.19.y > according to popcornmix. See > https://github.com/raspberrypi/linux/issues/915. > > Signed-off-by: Frank Hunleth > --- > configs/raspberrypi2_defconfig | 8 ++++---- > 1 file changed, 4 insertions(+), 4 deletions(-) Applied both patches, thanks. What about the raspberrypi_defconfig ? Is there any reason to keep it around using the 3.12 kernel ? Or can we rename raspberrypi_dt_defconfig to raspberrypi_defconfig ? Thanks, Thomas -- Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com