From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Mon, 18 May 2015 23:06:40 +0200 Subject: [Buildroot] [PATCH v2 1/9] configs: update at91sam9g45m10ek defconfig In-Reply-To: <1431544977-2274-2-git-send-email-alexandre.belloni@free-electrons.com> References: <1431544977-2274-1-git-send-email-alexandre.belloni@free-electrons.com> <1431544977-2274-2-git-send-email-alexandre.belloni@free-electrons.com> Message-ID: <20150518230640.376e0748@free-electrons.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hello Alex, On Wed, 13 May 2015 21:22:49 +0200, Alexandre Belloni wrote: > Use kernel (3.18) and u-boot (2015.01) from Atmel's repositories. > > Signed-off-by: Alexandre Belloni > --- > configs/at91sam9g45m10ek_defconfig | 22 +++++++++++++++++----- > 1 file changed, 17 insertions(+), 5 deletions(-) > > diff --git a/configs/at91sam9g45m10ek_defconfig b/configs/at91sam9g45m10ek_defconfig > index c958859df1a3..147789d165df 100644 > --- a/configs/at91sam9g45m10ek_defconfig > +++ b/configs/at91sam9g45m10ek_defconfig > @@ -1,9 +1,21 @@ > BR2_arm=y > BR2_arm926t=y > -BR2_PACKAGE_HOST_SAM_BA=y > -BR2_TARGET_AT91BOOTSTRAP=y > -BR2_TARGET_AT91BOOTSTRAP_BOARD="at91sam9m10g45ek" > +BR2_LINUX_KERNEL=y > +BR2_LINUX_KERNEL_CUSTOM_GIT=y > +BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/linux4sam/linux-at91.git" > +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="03329ca4cf6b94acc5c65b59b2d1f90fdeee0887" You also need to ensure that the kernel headers used for the toolchain are of the same version or older than the kernel you're building/running. So, something like: BR2_KERNEL_HEADERS_VERSION=y BR2_DEFAULT_KERNEL_VERSION="3.18" BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_18=y And ditto for all your other defconfigs. Thanks! Thomas -- Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com