From mboxrd@z Thu Jan  1 00:00:00 1970
From: Yann E. MORIN <yann.morin.1998@free.fr>
Date: Fri, 19 Jun 2015 22:30:06 +0200
Subject: [Buildroot] [PATCH 1/2] rpi-firmware: allow disabling
 installation of binary DTBs
In-Reply-To: <1430579415-22802-1-git-send-email-bos@je-eigen-domein.nl>
References: <1430579415-22802-1-git-send-email-bos@je-eigen-domein.nl>
Message-ID: <20150619203006.GC3638@free.fr>
List-Id: <buildroot.busybox.net>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: buildroot@busybox.net

floris, All,

On 2015-05-02 17:10 +0200, Floris Bos spake thusly:
> The binary .dtb files are not suitable for everyone as they are
> kernel version specific.
> Reintroduces BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS option.

I am revisitng this one now that I have a little tiny bit of time.

Indeed, using the DTBs from rpi-firmware is not working with linux 3.19
or 4.0, although they do work with 3.18.

> Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
> ---
>  package/rpi-firmware/Config.in       | 10 ++++++++++
>  package/rpi-firmware/rpi-firmware.mk |  2 ++
>  2 files changed, 12 insertions(+)
> 
> diff --git a/package/rpi-firmware/Config.in b/package/rpi-firmware/Config.in
> index cd45be4..2de26e3 100644
> --- a/package/rpi-firmware/Config.in
> +++ b/package/rpi-firmware/Config.in
> @@ -45,4 +45,14 @@ config BR2_PACKAGE_RPI_FIRMWARE_BOOT
>  	default "_x"    if BR2_PACKAGE_RPI_FIRMWARE_X
>  	default "_cd"   if BR2_PACKAGE_RPI_FIRMWARE_CD
>  
> +config BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS
> +	bool "Install Device Tree Blobs (DTBs)"
> +	default "y"
> +	help
> +	  Say 'y' here if you want to install the binary DTB files which
> +	  are suitable for a rpi-3.18.y branch Linux kernel.
> +
> +	  Say 'n' here if you intend to compile the device tree files
> +	  from kernel source instead.

I would rephrase that as:

    If you are using a Linux kernel <= 3.18, you should say 'y' here.

    If you are using a Linux kernel >= 3.19, you should say 'n' here,
    and enable BR2_LINUX_KERNEL_DTS_SUPPORT to let the kernel build
    the DTB.

> +
>  endif # BR2_PACKAGE_RPI_FIRMWARE
> diff --git a/package/rpi-firmware/rpi-firmware.mk b/package/rpi-firmware/rpi-firmware.mk
> index cbcf790..9cccb38 100644
> --- a/package/rpi-firmware/rpi-firmware.mk
> +++ b/package/rpi-firmware/rpi-firmware.mk
> @@ -13,6 +13,7 @@ RPI_FIRMWARE_INSTALL_IMAGES = YES
>  
>  RPI_FIRMWARE_DEPENDENCIES += host-rpi-firmware
>  
> +ifeq ($(BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS),y)
>  define RPI_FIRMWARE_INSTALL_DTB
>  	$(INSTALL) -D -m 0644 $(@D)/boot/bcm2708-rpi-b.dtb $(BINARIES_DIR)/rpi-firmware/bcm2708-rpi-b.dtb
>  	$(INSTALL) -D -m 0644 $(@D)/boot/bcm2708-rpi-b-plus.dtb $(BINARIES_DIR)/rpi-firmware/bcm2708-rpi-b-plus.dtb
> @@ -21,6 +22,7 @@ define RPI_FIRMWARE_INSTALL_DTB
>  		$(INSTALL) -D -m 0644 $${ovldtb} $(BINARIES_DIR)/rpi-firmware/overlays/$${ovldtb##*/} || exit 1; \
>  	done
>  endef
> +endif

I'd put the overlays out of the conditional block, because they are
*not* built by the Linux kernel.

Also, I think we'd want an option to enable/disable installign the
overlays.

I'll take your patch here and repsin a bit later tonight.

Thanks! :-)

Regards,
Yann E. MORIN.

>  define RPI_FIRMWARE_INSTALL_IMAGES_CMDS
>  	$(INSTALL) -D -m 0644 $(@D)/boot/bootcode.bin $(BINARIES_DIR)/rpi-firmware/bootcode.bin
> -- 
> 2.1.4
> 
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot

-- 
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'