From mboxrd@z Thu Jan 1 00:00:00 1970 From: Maxime Ripard Date: Sat, 20 Jun 2015 09:29:49 +0200 Subject: [Buildroot] [V2 4/4] A20-OLinuXino-Lime: new board (mali) In-Reply-To: References: <1434741204-3988-1-git-send-email-francois.perrad@gadz.org> <1434741204-3988-5-git-send-email-francois.perrad@gadz.org> <20150619200859.GH11732@lukather> Message-ID: <20150620072949.GI11732@lukather> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On Sat, Jun 20, 2015 at 07:28:01AM +0200, Fran?ois Perrad wrote: > >> +# Bootloaders > >> +BR2_TARGET_UBOOT=y > >> +BR2_TARGET_UBOOT_BOARDNAME="A20-OLinuXino-Lime" > >> +BR2_TARGET_UBOOT_CUSTOM_GIT=y > >> +BR2_TARGET_UBOOT_VERSION="sunxi" > >> +BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/linux-sunxi/u-boot-sunxi.git" > >> +# based on U-Boot 2014.04 > >> +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="ea1ac32bf76eb60baef474c2516fc431b381d952" > >> +BR2_TARGET_UBOOT_FORMAT_BIN=y > >> +BR2_TARGET_UBOOT_SPL=y > >> +BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin" > > > > U-boot sunxi is unmaintained and deprecated, you probably don't wnat > > to use that. > > > > When I try to use the mainline U-Boot (which works well with a > mainline kernel), I cannot start the linux-sunxi kernel. > I think that it is problem with bootargs, but I haven't found the good > 'magic' value. > So, I stay with U-boot sunxi. I'm not sure this is a valid argument for such a patch. Have you read https://linux-sunxi.org/Mainline_U-boot#Boot ? Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: